Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Huge Gloat !!! *LINK*

Posts

Huge Gloat !!! *LINK*

#1

Brad Vietje

Huge Gloat !!! *LINK*

Brad Vietje

>I recently turned a wooden replica of a marble column for a very expensive and beautifully elegant solid bronze reproduction telescope that friends are producing in limited quantities. They wanted a column that looked like marble, but weighed a lot less for shipment to the Chelsea Flower Show in London.

I turned the column out of Poplar (all end grain), and the faux marble paint job was done by a woman in Fitchburg, Mass. The gentleman is Russ Schliepman, who is marketing the telescope, and the woman in pink -- well, let's say she's pretty well known in Great Britian ! Russ had her audience for 5 minutes as he explained how the telescope/sundial/garden sculpture works. I'm hoping for a better photo, but wanted to post this w/out delay.

What a huge thrill to be part of something like this. I'm a happy camper.

Safe spinning,

Brad Vietje

Newbury, VT


img

Porter Garden Telescope Reproductions

Re: Huge Gloat !!! *LINK*

#2

Brad Vietje

...oh, and here's an actual turning shot...

Brad Vietje

>Wooden pedestal was turned in 3 parts -- all end grain. Here's the column before roughing. The entire thing was 32" tall, and about 10" diameter at the top of the capital, and about 13" at the plinth, which sits on a 15" square piece of Mahogany.


img

Re: Huge Gloat !!! *LINK*

#3

Brad Vietje

OOPS -- sorry Brit's !

Brad Vietje

>Sorry for the faux pas... I meant that Russ had an audience with the Queen for five minutes, NOT that he had her audience... Anglophiles will be aghast at such a suggestion !

Safe spinning,

Brad Vietje

Newbury, VT

Re: Huge Gloat !!! *LINK*

#4

Re: ...oh, and here's an actual turning shot...

AndiWolfe

>Pretty cool, Brad. Congrats!

Re: Huge Gloat !!! *LINK*

#5

Brad Vietje

Re: ...oh, and here's an actual turning shot...

Brad Vietje

>Thanks, Andi ! I hope you check out the telescope link -- these are incredible castings with all sorts of botanical elements you'd really appreciate. The original that was copied is one of 22 known survivors of fewer than 200 telescopes made from 1923 - 1926. A high-quality telescope and sundial, but really a sculptural work of art !

Safe spinning,

Brad Vietje

Newbury, VT

Re: Huge Gloat !!! *LINK*

#6

Re: Huge Gloat !!!

Dave Belser

>Brad thats way cool.... I used to be an amature telescope maker in a previous life. One thing - I don't understand your "all end grain" comment, it looks like a staved construction tube turned. How is that all end grain or what am I missing?

- Dave

Re: Huge Gloat !!! *LINK*

#7

Brad Vietje

Re: Huge Gloat !!!

Brad Vietje

>Thanks Dave,

Well, I may have been a little too quick with the fingers there... The column is staved with the fibers in normal, spindle orientation. Most people would probably glue up the capital and plinth blanks in side-grain orientation -- like a bowl -- across the grain of the column. Because this was getting a faux marble paintjob, and would be on display both indoors and outside, I was worried about moisture-induced movement that could crack the paint and ruin the illusion. Thus, the endgrain orientation really applies to the ends. This means more glue joins, and a little more expense, but seemed worth the fuss for such a high-end project. I was pleased at how easy it was to turn the top surface reasonably flat, given that it was a lt like turning a butcher block with all end grain facing the top surface.

Safe spinning,

Brad Vietje

Newbury, VT

BTW: feel free to re-kindle the ATM flame and come to Stellafane this summer: www.stellafane.com

Re: Huge Gloat !!! *LINK*

#8

Re: Huge Gloat !!!

Jorge Castaneda

>Way to go Brad, congrats

Re: Huge Gloat !!! *LINK*

#9

Keith Tompkins

Re: Huge Gloat !!!

keith tompkins

>Awesome Brad! Well done!

Re: Huge Gloat !!! *LINK*

#10

TN

Dave Belser

>I thought you might be a little bit of a telescope nut. It must have been something you posted or said at a demo. My first trip to Stellafane was when I was in 10th grade. My scope placed second in the juniors group, there was even a tiny little bit of the corner of it in a picture in S&T. Whoohoo!

- Dave

Re: Huge Gloat !!! *LINK*

#11

Brad Vietje

Re: TN

Brad Vietje

>Sher 'nuff a TN from way back. I too started grinding a telescope mirror back in high school (but didn't finish it for 21 years !) I helped start a public (free) telescope making class we offer each winter about 10 years ago, and have been teaching that class on and off ever since. I recently retired as STM prez, since I was just waaaay too busy getting my solar store started up. Things have changed a lot there -- check out the web site for all the gory details. We now maintain about 88 acres, and recently finished a huge pavilion so we don't have to gather under a leaking tent to hear the talks -- and we can actually see the slides projected! Still a fun weekend (a 3-day convention starting on Thursday this year), even when I am too busy to relax and enjoy much of it -- soon though...

Safe spinning,

Brad Vietje

Newbury, VT

Re: Huge Gloat !!! *LINK*

#12

Re: Huge Gloat !!!

Jennifer@Indy.USA

>That is really cool!

Good for you, Brad! A well deserved Gloatimous Maximous!

Jen :)

Re: Huge Gloat !!! *LINK*

#13

Re: Huge Gloat !!!

Tommy Holmes

>Too cool! Congratulations. And definitely nice work.

Re: Huge Gloat !!! *LINK*

#14

Dick Hines

Re: Huge Gloat !!!

Dick Hines

>I think this is the first photo I have seen of her with out a hat.

Re: Huge Gloat !!! *LINK*

#15

Brad Vietje

Sorry -- TN = Telescope Nut

Brad Vietje

>

Re: Huge Gloat !!! *LINK*

#16

Re: OOPS -- sorry Brit's !

Tim Grenville-Cleave

>We assumed that you didn't mean it the way it came out, so don't worry, 007 is on his retirement yacht and all the Redcoats are elsewhere getting suntans etc