Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Crape Myrtle

Posts

Crape Myrtle

#1

Dick Hines

Crape Myrtle

Dick Hines

>Getting ready to cut a crape myrtle for house addation. Anyone turned crape of any size. I did some small pieces once while it was still green. Cracked! That was before I found out about DNS.

The trunk is about 12"-14" and there some large branches.

Re: Crape Myrtle

#2

Re: Crape Myrtle

James McClure

>Here's a bowl I did out of crape myrtle. I finished turned it (fairly thin) while still green and it turned out fine. It didn't warp much either.

This was some wood that I found on the side of the road near a house. Most of it was too small to do much with and the larger peices I picked up had a large soft, fibrous area around the pith. I did manage to get a few small bowls out of it. Most of what I picked up cracked up like crazy before I could get to it. The figure in the wood was outstanding. I have been looking for more, but it's hard to find it large enough to do decent sized stuff with. Hope this helps...


img

Re: Crape Myrtle

#3

Re: Crape Myrtle

Charles B. Watson

>I turned a natural edge bowl from a very old crepe myrtle last year.

The tree was growing at a house well over 100 years old. The finished bowl is 14" x 11" x 7". It did move as indicated by the dimensions.

The green wood isn't too pleasant to turn as it turns metal black very quickly.

Re: Crape Myrtle

#4

Yes, It Is Great!

Barbara Gill, Remlik VA

>

Re: Crape Myrtle

#5

Re: Crape Myrtle

Philip Duffy

>So, good buddy, are you offering or just bragging???? Phil

Re: Crape Myrtle

#6

Dick Hines

Re: Crape Myrtle

Dick Hines

>Bragging