Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Lesson Learned

Posts

Lesson Learned

#1

Lesson Learned

Sean Troy

>Color me STUPID! Last week I posted that my lathe was down and I called tech support to send out a tech (lathe under warranty) to see why my lathe was losing power as I made cuts. Well, the service company that was supposed to call me to make an appointment never did and then never returned my calls to see what was up. Jump ahead to today and I went out to look at the lathe again with a friend visiting from Flordia to see if we can spot the trouble. Two heads are better than one right? While he's bending down to look at the converter box, I turn on the lathe to show him it does turn (Burl cap still mounted on the lathe) as I turned it on and turned up the speed, I noticed the chuck was spinning but not the Burl Cap. There was never anything wrong with my lathe, I was using a screw chuck and the threads were stripped inside the wood. Glad the lathe is ok after all but I sure feel like an idiot !!!

Re: Lesson Learned

#2

Re: Lesson Learned

Norm Smith in Nova Scotia

>We have all done things like that. It sure does make you feel dumb. Onward we go until the next blooper.

Norm

Re: Lesson Learned

#3

Re: Lesson Learned

John Lucas

>Thanks for making me feel smarter. At least for today anyway.

Re: Lesson Learned

#4

Re: Lesson Learned

robo hippy

>It recalls a few times when my tools just wouldn't cut. I resharpened them a couple of times and they still wouldn't cut. Turns out that I had the lathe in reverse.

robo hippy

Re: Lesson Learned

#5

Re: Lesson Learned

George Van

>When I do that I consider it polishing the edge!

Re: Lesson Learned

#6

Re: Lesson Learned

John Lucas

>I was teaching a class and one of the students was having trouble getting the gouge to cut. I took the gouge and it wouldn't cut so I sharpened it and came back. it still wouldn't cut. It was in reverse. I've also done that myself. makes you feel pretty silly.

Re: Lesson Learned

#7

Re: Lesson Learned

Barry Irby

>I posted a message over on the Message Board about how to tell if Hitachi Nails would work in my Senco nailer. Went back to Lowes to ask again and the clerk pointed out the label on the bin said they were guaranteed to work in a Senco gun. Then I looked at the package. Same thing. The package said they were guaranteed to work. Duh! Did I mention my patron saint is St. Upid? Perhaps us manly men should read the fine print.

Re: Lesson Learned

#8

Re: Lesson Learned

C.W.Stivison

>It's unmanly to read directions first. Anybody could figure it out then.

CW

Re: Lesson Learned

#9

Re: Lesson Learned

E.T.

>There was a story, in one of the woodwork mags, last year about a guy who took some trash to the local dump. He found a mitre saw sitting on a pile of trash. The writer took the saw home and on closer inspection he found the blade to be installed backwards. This guy concluded the previous owner had become frustrated with the crapy ctting saw and packed it off to the dump. It was probanly the safest thing for that person to do. ET

Re: Lesson Learned

#10

Re: Lesson Learned

John Lucas

>My dad gave me his electric chainsaw because it wouldn't cut worth a darn. I installed the blade on correctly and gave it back to him.

Re: Lesson Learned

#11

Re: Lesson Learned

Barry Irby

>I damaged a brand new chain in less than a minute of use. Had it repaired. They put in about an eight inch section. My son tried to use it. We argued over which way it should face. I took the chain back to the shop. They were so embarrased they fixed AND gave me a new chain.

Re: Lesson Learned

#12

Re: Lesson Learned

Chip in Plano

>I came home from college one year to see my dad. He was installing pressure treated timber for flower beds. I saw him pull the trigger to cut a piece and smoke billowed from the burning (not cutting) wood. As the blade spun down, I noticed it was spinning backwards. I told him the blade was dull, as he went off to the garage to get a fresh blade, I took off the old blade and installed the new one correctly this time. Figured he was paying for my college...so I kept my mouth shut. That's 22 years ago.

I've plenty of stupid and dangerous humiliating moments since. I just figured that's the Lord's way of saying...find something else to do today.

Re: Lesson Learned

#13

Re: Lesson Learned

Jennifer@Indy.USA

>Sean, you're a real trooper for posting this! I'm not sure I'd have the nerve to :)

Glad the lathe is okay!

Jen

Re: Lesson Learned

#14

Re: Lesson Learned

Jim Underwood

>The other day our club bought some casters for our lathe. I made the plywood base with a cutout for the feet, and put it all together. After I'd loaded the headstock, tailstock, tool rest, and all the extra paraphernalia (monitor, PA system etc.) back on the lathe and base, I noticed I'd placed the lathe backwards on the new base, so that as a turner was standing on the correct side of the lathe, the cutout was on the other side. Figuring I'd straighten it out when I had more time, I left it.

So last night before the demo a friend and I took the headstock and all off, and set it up so everything was on the correct side.

Once the demonstrator started his demo, he couldn't get the tailstock to tighten up on the piece he was working on no matter how much he tightened it. Each time he approached the piece with a tool, it would just stop spinning.

Finally someone noticed that the headstock wasn't locked down.... And all eyes started looking at me...

woops.