Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Thank the Lord for lathe ballast......

Posts

Thank the Lord for lathe ballast......

#1

Thank the Lord for lathe ballast......

Wolf Kiessling

>About six weeks ago we got some really heavy rain, for south central Oklahoma, and my house flooded. Affected areas were my foyer, hallway, living room, office and garage. It came as a real surprise, don't have any flood insurance due to where we live, and it took my about a week to clean up the mess.

We have just come out of a six year drought and it's been raining, nearly daily for the last month or so and the ground is super saturated. I was gonna go to a dance last night but my gf said it was much too nasty out and we should just stay home. Okay. Talk about dodging a huge bullet. About 8:30 last night a real frog strangler came along and all hell busted loose. I remembered that I had a couple of sand bags weighing down the lathe so I rushed out to the shop and sandbagged the front door. The garage got inundated but there wasn't anything I could do about that (except clean it up this morning) However, the sand bags did a marvelous job and the front door and, between my shop vac (see, the shop helped again) and nearly every towel in the linen closet, we kept the water mostly at bay in the foyer. Only about three square feet of carpet in the hallway got soaked. When all was over and done, about 10:00 pm, I put the shop vac on the saturated carpet, put a fan on it all night, and everything is ship shape and squared away this morning. Got a hell of a mess in the driveway and garage, though. I measured the water level this morning and the water came up 4 inches on the front door.

Anyhow, if it weren't for the lathe sandbags, I would have had a disaster of major proportions. This flooding was worse than the one six weeks ago..........

Re: Thank the Lord for lathe ballast......

#2

Re: Thank the Lord for lathe ballast......

Allen Neighbors

>Wolf, I'm just outside the SW Corner of Oklahoma. Where are you located? I didn't know those storms that missed us put so much rain out in that area.

Good thing you had the sandbags. The street on the East side of my house has been a lake a time or two. Just yesterday, they finished putting 15 yards of topping on it to build it up. Might be a good idea for any of us in low lying areas to have some on hand.

Thanks for posting.

Re: Thank the Lord for lathe ballast......

#3

Re: Thank the Lord for lathe ballast......

Wolf Kiessling

>I'm located in Duncan, Allen.

Yeah, I thought of the sandbags, that are weighing down the lathe, six weeks ago AFTER the house flooded. When I saw that water rising last night, I was ready. I really never expected to use them 'cause who ever heard of flooded houses here. I am just so glad we never went to that dance last night. Somebody was sure watching out for me.

When I lived on the Gulf coast, where we got 50 plus inches of rain per year, I never took water into any of the houses I owned there.

Oh well, live and learn........

Re: Thank the Lord for lathe ballast......

#4

JL

Re: Glad to hear you put your shop tools..

JL

>to good use. Now if you could only send some of the rain over here! The smoke from the fires in South GA have drifted up to the NC border and beyond.