Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Dyed, Beaded Ash Vase 5236

Posts

Dyed, Beaded Ash Vase 5236

#1

Dyed, Beaded Ash Vase 5236

Bruce Forrest

>This is an ash vase which has been dyed with aniline dye. It is about 10 1/2 inches tall by 6 inches in diameter. I experimented a bit with liming wax on it, but didn't like the effect so I removed the wax with mineral spirits. All comments welcome.


img

Re: Dyed, Beaded Ash Vase 5236

#2

very nice

robert davis

>

Re: Dyed, Beaded Ash Vase 5236

#3

Bob Moffett

Re: Dyed, Beaded Ash Vase 5236

Bob Moffett

>I like it. It has a nice smooth curve from top to bottom. The base is a pleasing size and I like the beads. Good Job!!

Re: Dyed, Beaded Ash Vase 5236

#4

Re: Dyed, Beaded Ash Vase 5236

Jennifer@Indy.USA

>Bruce, this looks like a very nicely executed beaded vessel. Nice job! I like the color too. How on earth did you get the liming wax out of all those grooves?!!

Jennifer

Re: Dyed, Beaded Ash Vase 5236

#5

Re: Dyed, Beaded Ash Vase 5236

Bruce Forrest

>Thanks for the comments. Jennifer, it wasn't really hard cleaning it up again. I vacuum chucked it on the the lathe to hold it, and was liberal with the mineral spirits while wiping with paper towels and 0000 steel wool. A couple of rinses and done. No problem.

Re: Dyed, Beaded Ash Vase 5236

#6

I Like It ! ! !

Barry Turner

>

Re: Dyed, Beaded Ash Vase 5236

#7

Is the inside beaded also? :)

Jake Niedling

>

Re: Dyed, Beaded Ash Vase 5236

#8

Re: Dyed, Beaded Ash Vase 5236

Wayne Leach-NW Ontario

>Bruce,

Heck of a job! Form looks great and beads so evenly spaced and well turned. Super work!

Wayne

Re: Dyed, Beaded Ash Vase 5236

#9

Re: Dyed, Beaded Ash Vase 5236

Wayne Allen, Carson City, NV

>Bruce -- Very nice piece of work. Did you do the beads with a beading tool, a spindle gouge, a skew or ???

Re: Dyed, Beaded Ash Vase 5236

#10

Re: You make me sick...

Allen Neighbors

>both, you and Wally. I try and try, but I can't make a single bead that looks like a bead, and you two cover entire vessels with beads that are perfect! It's sickening. :)

I feel like one of those people who keep getting beat up, and keep coming back for more of the same. I love to see these!

You awe me, but you still make me sick. :)

Re: Dyed, Beaded Ash Vase 5236

#11

Re: Dyed, Beaded Ash Vase 5236

Bruce Forrest

>Thanks to everyone for the comments. As to what tool to use, I don't think that there is a single tool for beads that's "right" for everyone.

I certainly have tried a number of them. While a skew might be great for someone, another might have better luck with a three point tool. And then there are a large variety of "beading tools" out there (of all sorts of different styles). And what's "right" for you probably also depends on what size of bead is required.

So my advice, for what it's worth, is to try out several different tools, find what seems comfortable and practice a bit. One other thing to consider is the type of wood. Ideally, what you want is a hard tight grained wood like maple. That's not to say you can't make good beads in other woods. It's just apt to be a bit trickier.