Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Lathe Update...

Posts

Lathe Update...

#1

Lathe Update...

dwr

>... The lathe has a new home if and when it arrives. Two days of cutting welding and painting (bad photograph... need to read John's lighting article...;) Gloss black SHOULD go with the powder coating...

Called Derek.

Powder not there.

Derek was to call supplier and call me right back.

Three hours later, called back and said it would be there Friday A.M.

Asked how they were going to re-finish.

Derek said Sand and re-powder base coat and top coat.

Now I don't feel bad passing on the urethane primer for another $100... four coats of powder should work.... yeah, he says...

Asked when lathe would be ready for pick-up.

Friday at 2:00... you betcha...

Told Derek I was going to be there at 10:00 with camera in hand...

Stay tuned to the Bat Channel...


img

Re: Lathe Update...

#2

This is better than a soap opera!

James McClure

>Keep the updates coming.

Re: Lathe Update...

#3

As the lathe turns...

Doug Thompson near Cleveland

>

Re: Lathe Update...

#4

Waiting patiently for the...

dwr

>... the truck to arrive so we can hit the road.

Derek called and asked if there were any areas with "tolerance issues" (besides my patience I assume...) because of the thickness of the powder build-up... Don't like the sound of that...

Did have a thought: Powder Coating works off an electrical charge... so I am wondering how well the "coverage" is going to be on 1/2" steel that already has two coats on it... hope they crank up the juice...