Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Lathe Update... minor set-back... LONG

Posts

Lathe Update... minor set-back... LONG

#1

Lathe Update... minor set-back... LONG

dwr

>... with the Powder Coating. Had the truck scheduled and called the Powder Coater to verify that the lathe was completed on Tuesday.

Todd: "Didn't Derek call you and tell you about the problem we had?"

Me: "Nnnnooo..."

Todd: "Well, it seems they ran out of the top coat color and it came out splotchy and the color was _______ not _________."

Me: "That color is not acceptable. I would have to put a black tarp over it so no one I know can see it."

Me: "So, is the whole lathe messed up or just the 20+ smaller pieces I also dropped off?"

Todd: "I don't really know. I can go out to the shop and check into it and call you back in a few minutes."

Me: "You do that, Todd..."

Now fast forward two hours....

Phone rings in the shop.

Me: "Hello?"

Derek: "Dave?"

Me: "Yes?"

Derek: "This is Derek. So I hear you heard about our little problem."

Me: "Kinda... suppose you bring me up to speed."

Derek: "Well, that particular color of top coat is hard to apply evenly and get a good result. Some of the final baking came out splotchy. My dad ran out of the top coat, so I got on the horn and ordered up some more. It will be here by Friday."

Me: "So, what about the work you have already done?"

Derek: "Well, the top coat has to come off and be re-done."

Me: "What about the base coat? Won't it have to come off as well?"

Derek: "Well, most likely."

Me: "------(silence)------------"

Derek: "Dave?"

Me: "So, when is this going to be complete?"

Derek: "Well, I guarantee it done by Friday afternoon."

Me: "Okay.... keep me informed. I want to be there when you start to re-finish the lathe."

Derek: "No problem." (is he kidding?)

So, I guess I get to wait until Friday to personally witness the abortion in progress...

In the interim, we started the fabrication on the mobile base. All tacked up and sandblasted and ready for final welding... then painting.... NO Powder Coating!!

Dave ... looking for sharp instruments in the NW.


img

Re: Lathe Update... minor set-back... LONG

#2

Re: Lathe Update... minor set-back... LONG

Doug Thompson near Cleveland

>I'm sorry to read that you have to wait a few more days... remember the old saying "stuff happens" well at least they are willing to make it right.

I bought some extra dark shades just to view your new lathe...

Pictures this weekend?

Re: Lathe Update... minor set-back... LONG

#3

Dick Hines

Re: Lathe Update... minor set-back... LONG

Dick Hines

>Don't you just love it when a plan comes together? It will be worth the wait.

Re: Lathe Update... minor set-back... LONG

#4

Shades would have been a good idea...

dwr

>... to hide the "Girlie" color that the lathe turned out to be... not to demean the tender gender side of turning...;) I don't mind wearing a smock but draw the line at wearing a skirt... even on St. Patrick's Day...;)

Dave... hoping for pictures over the weekend...

Re: Lathe Update... minor set-back... LONG

#5

Yeah... kinda like ...

dwr

>... The "A" Team in reverse. The last couple of outsourced projects have been a disaster.

A two week job that ended up taking over 8 months... and now a Powder Coat job from _ _ _ _. Sad thing is they are a top, Award Winning, Powder Coating company!

The issue I have with the Powder Coat is that stripping is a lot harder than most people realize. It is so strong, that if you try sandblasting, you risk warping the steel panels. Hard to say what the Ringling Brothers Powder Coating are going to do... In fact, we gave up sandblasting the Delta Mobile Base parts and used a grinder, because we were burning up a $50 bag of blasting media with hardly any effect (see the picture). I can't imagine what it would take for 48" x 24" x 24" lathe housings...

Dave... trembling in the NW


img

Re: Lathe Update... minor set-back... LONG

#6

Just call it a KILT

Jim Swank

>

Re: Lathe Update... minor set-back... LONG

#7

Sure, but it's ...

dwr

>... what you wear underneath that scares me...;)