Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Delta Lathe vs Old Craftsman Lathe

Posts

Delta Lathe vs Old Craftsman Lathe

#1

Delta Lathe vs Old Craftsman Lathe

Jay Fischer

>Does anybody have an opinion (?!) on the Delta over the old Craftsmans? I don't like the tool rest on my Craftsman since it's cantilevered and tends to wobble when you're working close to the edge on the big tool rest. The Delta looks like a more solidly mounted assembly. Is there a replacement/after market tool rest that would work well on the Craftsman? Mine's the one with the 2 1/4" diameter tube to which the banjo clamps.

Thanks!

Jay

Re: Delta Lathe vs Old Craftsman Lathe

#2

Re: Delta Lathe vs Old Craftsman Lathe *LINK*

Sean Troy

>John Lea custom makes them to fit your lathe.


http://www.woodturningtools.net

Re: Delta Lathe vs Old Craftsman Lathe

#3

Bob Moffett

Re: Delta Lathe vs Old Craftsman Lathe

Bob Moffett

>I used to have one of the Craftsman tube type lathe. If the Delta is in good shape and at least 12", I would go with it.