Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Lathe Update...

Posts

Lathe Update...

#1

Lathe Update...

dwr

>... for those that are still following the long drawn out process.

Well, the lathe went in for powder coating two weeks ago tomorrow. It was to be picked up today but the truck was unavailable until tomorrow.

In the meantime, I had ordered a Delta Universal Mobile Base for $49 on Amazon (gotta love the free shipping...;) Today, I went to my secret steel salvage yard, and for about $5 and change, I got a bunch of 1.5" square tubing with 3/16" wall thickness. Should be ample for the 900# lathe. I cut the pieces to fit the mobile base kit and the attached picture is the end result.

The mobile base is only mocked up at the moment. I will sandblast, weld and paint tomorrow, so the lathe will have a nice new home when it gets off-loaded.

I suspect that I will be replacing the two wheels in the near future, as I seriously doubt they withstand the stress for any length of time. I may have to mill a couple of solid steel wheels and press in a couple of bearings, as I do not think I will find a 2.5" diameter wheel that will support the weight. I do not expect to move the lathe far or often, so the demands will not be too taxing.

Wednesday is re-assembly day and Thursday is the beginning of testing the new belt configuration and tool rest / tail stock assemblies... and some new pictures of the paint job.

If all goes well, then it will be time for new grinding wheels, a large chuck (Vicmarc 120 or Stronghold) and some real bowl gouges... and a homemade hollowing rig...;)

Dave... who is anxious in the NW after nearly two years...


img

Re: Lathe Update...

#2

Re: Lathe Update...

Mike Cunningham (Cape May NJ)

>Thanks for the update!! I'm enjoying the process almost as much as you!

Mike

Re: Lathe Update...

#3

Same here

Jorge Castaneda

>Please keep us informed of the developments Dave.

Thank you

Jorge

Re: Lathe Update...

#4

Just for perspective...

dwr

>... here is a picture of the Tail Stock Quill.

It is mocked up in a section of housing that is the same as the piece getting powder coated. It is 1.5 x 4 ACME C-2 thread.

The real housing has identical C-2 Nuts milled down, pressed and welded into the housing. This quill gets threaded through the housing and the 6" chrome hand-wheel gets installed. The third nut is a jam nut that will get milled down and will lock the quill into place. The live center is a #2 MT.

I think I posted a picture of the tail Stock housing but will post another one for comparison.

Dave - who has ideas for Monster Lathe V2.0....


img

Re: Lathe Update...

#5

Tail Stock housing...

dwr

>... that is being powder coated...

Dave


img

Re: Lathe Update...

#6

Re: Lathe Update...

Wally Dickerman in Arizona

>Dave, my 800 lb. (plus 400 lb. of sand) Nichols lathe also has wheels. John Nichols told me that they are wheels that are used on dumpsters. The lathe has 4 heavy duty leveling jacks (2 inch dia). When the jacks are raised the lathe is on wheels.

Wally

Re: Lathe Update...

#7

Re: Lathe Update...

Bob Fawcett

>I too am enjoying all your updates. Keep them coming.

A suggestion.

You might want to add some adjustable feet to the corners that can be used to both level the lathe, and to "lock" it in place when it does not need to move. I put feet on my mobile cabinets, but they don't support anywhare near the weight. You can get suitable feet from many of the industrial supply houses. They could be bolted on or welded as needed. I saw some recently in Woodcraft (I think) that can support 200lbs each. Four of these may suffice.

Re: Lathe Update...

#8

ooooh...

dwr

>... dumpster wheels! Great idea. I had originally installed four stabilizing feet from McMaster Carr ($16 each) which had 1/2" diameter shafts and rated for 350# each. Two snapped off... seems that the "feet" were threaded onto a stem that was turned down to 3/16" diameter! Which, of course, made the 1/2" diameter shafts worthless... Now I have to fight with them for a refund.

I will be installing two feet through the square tubing ends at front, so when the "lift" is in the down position, the front of the lathe is fixed and serves to lock the lathe in position.

Bring your turning tools Wally, the lathe will work for lefties or righties...;)

Dave

Re: Lathe Update...

#9

Yeah, I plan...

dwr

>... to install two feet through the square tubing ends at front, so when the "lift" is in the down position, the front of the lathe is fixed and serves to lock the lathe in position.

Like I mentioned in the post above, I had originally installed four stabilizing feet from McMaster Carr ($16 each) which had 1/2" diameter shafts and rated for 350# each. Two snapped off... seems that the "feet" were threaded onto a stem that was turned down to 3/16" diameter! Which, of course, made the 1/2" diameter shafts worthless... Now I have to fight with them for a refund.

Dave... who is hoping to post Technicolor pictures soon... wear your "cools", it could be bright...;)

Re: Lathe Update...

#10

Re: Lathe Update...

Doug Thompson near Cleveland

>I can't wait to see this project completed... It's only five weeks till the symposium so get ready for a crowd.

Re: Lathe Update...

#11

Doug...

dwr

>... I am going to be needing some turning tools... you know, the kind that guarantee to never catch, always leave a perfect surface and come sharpened for life...

I'm trying to score a hat-sized piece of tree fiber for you...

With three lathes in the shop, I have room for a number of visitors to play around...

Keep me posted on your itinerary...

Dave

Re: Lathe Update...

#12

Good stuff Dave Keep it coming!!

Dave Peebles Lyons, Ohio!

>

Re: Lathe Update...

#13

You don't know it yet BUT...

Doug Thompson near Cleveland

>I'm going to send about 5 or 6 boxes of tools to your home before the symposium so you'll have your pick. Just a 15 -16 inch bowl blank will be fine, keep it wet or burried under some shavings. How far away are you from Portland?

Re: Lathe Update...

#14

Doug...

dwr

>... I won't tell me about the boxes... that way it will be a surprise!

I live in Sherwood, about 15 miles or so, Southwest of Portland. A nice 20 minute drive to just about anywhere in Portland from my house.

I have a friend with a bunch of Walnut logs. He got a bandsaw mill about a year ago. I need to make a visit and get my hands on some fresh cut stock and see what else he has laying around. Need to visit my friend with 40 acres... he has Madrone and Maple and some Cherry.

I will start some due-diligence for some real wood... but finding some stuff as sweet as what you cut up at the log dump a few weeks past is going to be tough to compete with!

Dave... keeping the secret from himself...

Re: Lathe Update...

#15

Re: Doug, you need a nice wet...

Jamie Donaldson

>..chunk of madrone for a hat. When it dries, it will pucker up like old leather- I've seen one that JoHannes turned some time ago, and it has real character!

Re: Lathe Update...

#16

Re: Doug, you need a nice wet...

Doug Thompson near Cleveland

>Jamie, Johannes has some beautiful hats made from madrone... I hear madrone will start to pucker when it's still on the lathe and to be honest I don't have the skill to turn it.

Maple is by far the best (easiest) all around wood to turn. Light doesn't shine through walnut and barely through cherry. Ambrosia maple is common in this area but a "plain" maple stump will surprise you everytime. I turned a hat for Bernie (on this site) from stump wood and IMO looks better than the ambrosia.

Dave, I bring some hats made from Ohio wood just in case that one doesn't make it...