Beaded Lidded Vessel.....
Wally Dickerman in Arizona
>This piece is figured maple. It's 9 inches in dia. It is currently in Dale Nish's collection.
Wally
Knowledge You Can Build On — Est. 1998
Beaded Lidded Vessel.....
Wally Dickerman in Arizona
>This piece is figured maple. It's 9 inches in dia. It is currently in Dale Nish's collection.
Wally
Re: Beaded Lidded Vessel.....
Wally Dickerman in Arizona
>Surprise finial.
Wally
Very nice
Randy G
>that's a great looking vessel, I really like the beads you do. Also like the suprise finial, really neat addition to the box.
Re: Beaded Lidded Vessel.....
George Van
>Stunning Wally, the bead size is in a perfect ratio to the size of the vessel.
Cool!! But how did you
Jim K in Trappe PA
>squeeze it through the little hole in the lid?
Sooo Perfect!
Ruth Niles
>"It is currently in Dale Nish's collection. "
Wally, I was wondering what happened to that piece, I've been looking all over for it!!! ; )
Quite a beauty!!!!
Mike Stafford
>
Re: Beaded Lidded Vessel.....
Jim Shaver - Oakville, Ontario
>Hi Wally,
This one is really nice, I like the finial detail through the top and the colar.....beads are always amazing to see...what do you do when you tear out a bead?
:-)
Take care,
Jim
Re: Beaded Lidded Vessel.....
Barry Irby
>A follow up on Jim's question. Do you measure and set them off or do you just do them by eye? Do you try to get them all perfeclty the same or are they sequenced from smaller to wider and back?
Re: Beaded Lidded Vessel.....
Wally Dickerman in Arizona
>Jim, by choosing the woods I use I don't tear out any beads. It doesn't work on certain soft woods.
Barry, my tool is self-spacing...sort of like a checkering tool as used on gunstocks (I used to do some of that)
Wally
Re: Cool!! But how did you
Wally Dickerman in Arizona
>Did you ever see the arrow through the bottle trick? Well this wasn't done like that.
Wally
Thanks, PS, It's absolutley beautiful!
Barry Irby
>
Thanks For Your Comments Folks...
Wally Dickerman in Arizona
>
Re: Beaded Lidded Vessel.....
Mike Rubes, Apex, NC
>Hi Wally,
That's a really wonderful piece! Even without the surprise finial, it's just marvelous to look at.
Love the shape and the beads just make it even better.
Thanks for the pics. It's always fun to see your stuff.
Just curious, but I know you do really thin pieces and was wondering if you have to leave them a lot thicker for the beads or if you can still leave them as thin, but then just with a bead on top. If that makes sense?
Thanks again,
Mike
Turned yesterday, turning today and will hopefully turn tomorrow in Apex, NC!