Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Spalted birch bowl

Posts

Spalted birch bowl

#1

Spalted birch bowl

Wayne Leach-NW Ontario

>Hi All,

I have not done much turning or posted many pics but I have finally made a bowl that I am somewhat proud of. It is 5" Dia. x 2-5/8" high.

It was a bit of a challenge as it was "punky" in spots (always where you least want it)?

I built a rough phrugal photo booth but need to work on the lighting more in future!

Hope you all like it!

Comments and critique welcome.

Thanks for looking.

Best regards,

Wayne


img

Re: Spalted birch bowl

#2

Re: Spalted birch bowl #2 

Wayne Leach-NW Ontario

>


img

Re: Spalted birch bowl

#3

Re: Spalted birch bowl

Tom Storey

>That's a great looking bowl Wayne, I like the lines burned(?) near the top. There should be no end to spalted birch where you are. Are you near Kenora?

Tom

Re: Spalted birch bowl

#4

Leo Van Der Loo

WOW Wayne that's awsome, I really love it,a beauty

Leo Van Der Loo

>

Re: Spalted birch bowl

#5

Beautiful form. Great job, Wayne

Ruth Niles

>

Re: Spalted birch bowl

#6

ebd

Like it a LOT!

ebd

>

Re: Spalted birch bowl

#7

Re: Spalted birch bowl

George Van

>Nice form Wayne. Great finishing job on spalted birch, this is not an easy job to accomplish

Re: Spalted birch bowl

#8

Re: Wayne-the lighting is looking good...

Jamie Donaldson

>... but more direct from the R side than needed- is the light pointed up at the top and boun cing off the R side? That would soften the shadow ring around the base, and provide more light to the interior in the 2nd image. These images are also somewhat overexposed, robbing contrast and color saturation- experiment with the exposure compensation if your camera has such functions, or use manual override.

Re: Spalted birch bowl

#9

Re: Spalted birch bowl

Ken Grunke from SW WI

>It's a beauty Wayne, you have reason to be proud. Nice photo, too.

Re: Spalted birch bowl

#10

Re: Wayne-the lighting is looking good...

Wayne Leach-NW Ontario

>Jamie,

Thanks for the input! I cobbled together a booth like you suggested and the lighting is as shown in your plan - however - I did not have a 500watt Halogen so tried 2 150 watt halogens located front right and shining straight up. I changed these to a 150 watt 3200degree K photo bulb in an alum reflector and shone it straight up also. They both seemed like a lot of light as I made the enclosure smaller than suggested due to only having enough to make a 30 inch square roughly!

I will work on the exposure as you suggest and do more experimenting with reflector on left?

I was in photography professionally mannnnnnnnny years ago and doing digital for 8 years now. Too old to remember much from almost 50 years ago? Thank heaven for photoshop CS2!!!

Thanks for the good insights,

Regards,

Wayne

Re: Spalted birch bowl

#11

Re: Spalted birch bowl

Wayne Leach-NW Ontario

>Tom,

Thanks for the comments! Finally getting something off the lathe that looks presentable. Lots of spalted birch around here as the birch are dying off at the tops for some reason (acid rain) or ???

Yes, I live just 3 miles over the Man/Ont border not far from West Hawk Lake!

When I worked in Winnipeg in the Aerospace Industry I knew a Jim Storey - any relation?

Maybe you are not from Winnipeg - I took a chance???

Best regards,

Wayne

Re: Spalted birch bowl

#12

Re: Spalted birch bowl

Wayne Leach-NW Ontario

>Ken,

Thanks for looking at my momentus achievement!!!

It was fun to turn but punky spot complicated things a little.

I learned to grind a gouge from Mark Sillay and it really helped to turn the spalted areas.

I see you live in SW Wisconsin? I probably go past where you live each year when I go south to winter in Georgia?? We come down thru Duluth and Eau Clair, Wis Dells and Madison enroute!

I have looked at and admired lots of your work in the gallery in Wood Resource.

Best regards,

Wayne

Re: Spalted birch bowl

#13

Re: Spalted birch bowl *LINK*

Ken Grunke from SW WI

>Wayne, I grew up in Duluth and feel homesick on occasion, but no reason to go up there anymore as all family members have moved elsewhere.

You probably take I-90 down through Wisconsin, the closest that comes to me is Sparta which is about 45 miles north of me. Maybe some time if you make your trip down or up on a 3rd Saturday of the month, you can check out one of our AAW chapter meetings. We have John Jordan scheduled for September and just had Stuart Batty this weekend. He is quite an intense demonstrator, and an awesome fellow.

Thanks!


CRW Meeting Schedule

Re: Spalted birch bowl

#14

Thanks to all who commented on this!

Wayne Leach-NW Ontario

>