Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

lacquer and airbrush, long

Posts

lacquer and airbrush, long

#1

lacquer and airbrush, long

Michael Foster

>I have a turned and carved piece that I thought would look best finished with lacquer. I have a HVLP gun (gets air from an air compressor) that I honestly have never used because i don't have a spray booth and don't like the idea of all the solvents floating around in my shop. I used Deft in the can for this piece, but was not really happy with the quality of finish. I hate to rub it out, as it is a carved piece, but looks like that will be my only option.

The problem seems to be large droplet size in the finish sprayed out of the can. I recently got an airbrush, and got to thinking that this may be a good solution. Seems like one could easily contain the overspray and maybe get better aerisolization. Anyone have any experience with this? What lacquer do you use? I would probably have to order the lacquer, as I live in a small town with limited options for finishing supplies. Do you thin the lacquer to get more even coverage?

Re: lacquer and airbrush, long

#2

Re: lacquer and airbrush, long

Bob Way, Canton, MI

>I have used an airbrush to spray lacquer on most of my small projects and a few turnings. The results have been pretty good to my critical eye most of the time. I use Deft, thinned about 25 - 30% with lacquer thinner. I use a #3 needle and tip, and set the psi around 25 to start and will make adjustments to it until the coverage and thickness on a scrap piece are what I'm after. 3 - 4 coats with abrasive pad rubbing in between them.

The Deft stinks, and there is some overspray, so it would be worth considering ventilation and wearing one of those face masks that filters out fumes and airborne chemicals as part of the prep work. I'm not too familiar with any of the other available lacquers, so hopefully someone can offer you some options along those lines.

Bob Way

Canton, MI

Re: lacquer and airbrush, long

#3

Re: lacquer and airbrush, long

Ken Oakley-Sunny St. Cloud, Fla.

>I have sprayed lacquer with an airbrush, touch up gun and regular spraygun for many many years and have found most of the time that the results are not the greatest it was due to something I did wrong. I use Deft thinned about 50/50 in a Paasche Airbrush or a Binks touch up Gun using about 40lbs air pressure and most times very pleased with the outcome. I have sprayed automotive lacquers, enamels, polyurethane,varnish and shellac and each has it's own little issues that experience will overcome. I live in Florida and my shop is in my garage so almost all my spraying is outdoors or at least in the garge with both front and back doors open for ventilation. Don't spray in an enclosed area because a build up of lacquer fumes is a disaster waiting to happen. A good spray job is something that needs experience to happen.

Re: lacquer and airbrush, long

#4

Re: lacquer and airbrush, long

eaglesc

>I believe if you look in the finishing section articles you will find that Russ mentions air brushes.

I too was dissapointed with rattle can lacquer, the droplet size and the cost.

I bought a $5.00 air brush from Harbor Freight(on sale) thinking that it couldn't be any worse than the over priced spray cans.

I was right.

The air brush is economical and as far as fumes, I have a DC boot set up right behind the lathe.

over spray problem solved, its' vented outside(if it gets that far).

Re: lacquer and airbrush, long

#5

Re: lacquer and airbrush, long

robert davis

>i have use mostly deft in spray cans for ten years on allkinds of creations and never realized a pro blem with large droplets. cooler temps could cause that. i use satin most of the tine..

Re: lacquer and airbrush, long

#6

Re: lacquer and airbrush, long

Joe Donohue

>I have been using Deft from the can for a long time and I am happy with it.

As to droplet size, I have only had that problem with the semi gloss. The gloss and satin seem to be fine. There is some problem with the semi gloss and I finally gave up on it.

Joe Donohue

Re: lacquer and airbrush, long

#7

Re: lacquer and airbrush, long

Michael Foster

>Thanks for the responses. I'm going to give it a try. If it looks good, I'll probably install a vented exhaust fan/spray booth.

Re: lacquer and airbrush, long

#8

Tried it and worked great

Michael Foster

>Much better atomization and control. I was really happy with the results. Now I guess I'll have to build a spray booth with a vent fan. Meant to do this when I renovated the barn for a shop, just never really got motivated to do it. Thanks all for the advice.