Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Spalted Maple Burl HF

Posts

Spalted Maple Burl HF

#1

Andy DiPietro

Spalted Maple Burl HF

Andy DiPietro

>This one was a challenge. It was spalted and 3/4 dry. I soaked in a bucket of water for a month. Turn it and slurry sanded the outside with Waterlox. I hollowed it with my new Don Derry Laser Hollowing Tools. This made the difficult task of hollowing semi-dry wood do-able. The piece finished up at 8" Dia. x 8"High x 1/8" thick. I rounded the bottom more like an egg shape. All comments are welcome.

Thanks

Andy DiPietro


img

Re: Spalted Maple Burl HF

#2

Andy DiPietro

PIC2 

Andy DiPietro

>


img

Re: Spalted Maple Burl HF

#3

Bob Moffett

Re: PIC2

Bob Moffett

>I like it very much. I like that the curve flows all the way from the top to the bottom of the piece. If it was me, I might have put a collar in a darker, contrasting wood on it but that is just me. I think it is a beautiful piece as you have done it and I think anyone who collects turned art would be proud to have it in their collection.

Re: Spalted Maple Burl HF

#4

Re: Ditto, what Bob said!! :)

Allen Neighbors

>

Re: Spalted Maple Burl HF

#5

Andy DiPietro

Re: PIC2

Andy DiPietro

>Thanks for the compliments BoB. I think you are right that a dark collar could improve it by adding a nice contrast. My wife has already claimed this one for our collection, but I made two more without a collar. So those two would be ideal to add collars too. Good idea!

Thanks

Andy D.

Re: Spalted Maple Burl HF

#6

Re: Spalted Maple Burl HF

Jennifer@Indy.USA

>Andy, I really like this one.

A very nice piece. Beautiful wood too!

Jen

Re: Spalted Maple Burl HF

#7

Spalted Maple Burl HF

nailshooter

>My opinion, I like it the way it is, less the contrasting collar.

You did such a nice job on treating and finishing the wood that to me it should stand alone. I wouldn't want to be distracted from that gorgeous grain with another feature.

Love the shape too, as it shows off even more of the complexity of the spalted grain. I seem to see too many "ginger jars" these days.

Robert

Re: Spalted Maple Burl HF

#8

Re: Spalted Maple Burl HF

Tom Storey

>When looking at this piece Andy, the shape does not get in the way of the wood and it's features. Very pleasing to the eye.

Tom

Re: Spalted Maple Burl HF

#9

Re: PIC2

George Van

>Very nice form Andy, you showed the figure well with the chosen finish.

Re: Spalted Maple Burl HF

#10

Re: Spalted Maple Burl HF

Mike Cunningham (Cape May NJ)

>Very nice Andy! I like the shape and the curve is quite pleasing (Did you hear Don..."More like an egg or less like an egg?"...;^)

Mike