Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Spalted Oak Hollowform

Posts

Spalted Oak Hollowform

#1

Spalted Oak Hollowform

stacey s

>This one was definitely more difficult to photo. What should I do to reduce the hotspots from my lights? This oak was from the base of the tree where it was buttressed. I really wish I had more of this it is all gone. Some of the most spectacular oak I have ever seen. Comments/Critiques welcomed, especially on the picture quality.

Stacey


img

Re: Spalted Oak Hollowform

#2

Re: Spalted Oak Hollowform

john lucas

>Move your lights so one is high up and illuminates the top and the side. This one simulates the sun which is always up and not sideways. Then move the other light back a little or aim it less directly at the box so it will be dimmer than the other one. This will hopefully leave only one highlight. What you have now is what we call the deer in the headlight look. Both lights are at the side and produce a hotspot on the side.

Re: Spalted Oak Hollowform

#3

Re: Spalted Oak Hollowform

Bruce Forrest

>I'd like to see a bit of a different view other than a straight profile. I think we'd get a better view if you raised the camera angle a bit so that we could see that there is an opening in the top.

Re: Spalted Oak Hollowform

#4

Re: Spalted Oak Hollowform

Dinyar Chavda

>I agree with Bruce re the angle.

With regard to the hotspots, I find them very hard to avoid, particularly with shiny pieces. So, I resort to software. Using one of the packages like Corel Paint Shop Pro, or Elements, you can easily eliminate them. The picture below took me less than 5 minutes to create. It needs a little more work on the color of the hot spot, but I think you can see that it eliminates most of the brightness in those areas.


img

Re: Spalted Oak Hollowform

#5

Re: Spalted Oak Hollowform

Bob Fawcett

>I am no photo expert and can't tell you what to do to make it otherwise, but this picture looks almost washed out. It does not seem to have the saturation you need.

Maybe John or Jamie can say why or what to do, or tell me I am all wrong.

Re: Spalted Oak Hollowform

#6

On second thought

Bob Fawcett

>Try playing with your camera. If you can adjust exposre try 1 or 2 stops over exposure and try under as well. If you have a white balance adjustment try that as well .

What color is the background supposed to be?

What camera are you using? Tell the group, and I bet you will get more suggestions.

Like I said earlier, I don't know what is wrong, I just know it can be better.

Re: Spalted Oak Hollowform

#7

Re: Spalted Oak Hollowform

stacey s

>Thanks John,

I knew that I needed to change the lighting somehow I just wasn't sure how.

Stacey

Re: Spalted Oak Hollowform

#8

Re: Bob- you have a good eye for...

Jamie Donaldson

>...photos, and this exposure appears washed out due to the flat(too uniform)lighting. Shadows are necessary to add depth to an object, and having 2 light sources that are balanced on each side eliminates too much of the necessary shadow effect we call modeling. That's why I advocate a single light source augmented with a bounce card on the side opposite the light source. This also eliminates the headlight effect.

Re: Spalted Oak Hollowform

#9

Re: Bob- you have a good eye for...

stacey s

>Jamie with the light tent how do I use a bounce card and what should I use for the bounce card. Is there something special I should use for this or will a white board work?

Re: Spalted Oak Hollowform

#10

Re:I simply use a piece of white .....

Jamie Donaldson

>....foamcore board, and glue aluminum foil to 1 side to add some extra bounce when needed, but not for shiny surfaces.

Re: Spalted Oak Hollowform

#11

Re:I simply use a piece of white .....

stacey s

>Cool. I thought that I had seen that mentioned before but wasn't sure. With the light tent do I put it on the opposite side of where the light is(both the light and the reflector outside the tent?

Stacey

Re: Spalted Oak Hollowform

#12

Re:I simply use a piece of white .....

john lucas

>Stacy You put it on the opposite side as the light to bounce light back into the shadow side. It usually goes inside the booth but sometimes you can bounce light back into the tent from the outside if you catch what I call direct light. That is light that comes directly from the light source and not through the tent. This is a trick I use often. When you shine a broad light soarce at the tent the light usually shines on areas outside angle of the tent. I call this direct light. You simply put your reflector (white card, almuminum foil, or mirror) in the light path and boucne it back into the dark side of the piece.