Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Pot Pourri Lids/Covers

Posts

Pot Pourri Lids/Covers

#1

Pot Pourri Lids/Covers

Allen Neighbors

>I've searched for potpourri lids all over the net, and can only find them at Lee Valley and CraftSuppliesUSA.

Does anyone know of any other suppliers of these items? I'd like to find them at some lower prices.

Thanks, WC!

Re: Pot Pourri Lids/Covers

#2

Re: Pot Pourri Lids/Covers *LINK*

Tommy Holmes

>Penn State Industries has them a little cheaper but you have to buy them in sets of four. Good luck.


http://www.pennstateind.com/store/pkplid.html

Re: Pot Pourri Lids/Covers

#3

Re: Pot Pourri Lids/Covers

joe melton

>Packard sells them. Item number is 154929. A set of four different ones is $13.95.

Joe

Re: Pot Pourri Lids/Covers

#4

Re: Pot Pourri Lids/Covers

Jimiles-Charlotte, NC

>Allen:

I have got them from Packard. However the most interesting and cheapest supply I found was buying candles at Walmart that were in a glass container with a metal "potporri lid" on it.

Re: Pot Pourri Lids/Covers

#5

Re: Thanks for the answers...

Allen Neighbors

>I've got some ordered.

Thanks, again.

Ain't WC Grand!!!!???!!

Re: Pot Pourri Lids/Covers

#6

Re: Pot Pourri Lids/Covers

Allen Neighbors

>Jim, I didn't see this post until I had already ordered.

Thanks for the reply... (I'm gonna make a run to Wal-Mart in a few minutes, so I'll see if I can find these.) I'll use them sooner or later.

Thanks again.

Re: Pot Pourri Lids/Covers

#7

Re: Pot Pourri Lids/Covers

keith zimmerman, Normal, IL

>Allen, I have ordered from Packard and Craft Supplies before and like Craft Supplies the best. The reason for this is that I can choose the design I want and I'm not at the mercy of the supplier as to the design of the lid.

I am also partial to the more Artdeco looking lids that Craft Supplies carries. I think the people that buy them think so too. They sell much faster than the designs from Packard.

My $.02.

keithz

Re: Pot Pourri Lids/Covers

#8

Re: Made a trip to our SuperCenter...

Allen Neighbors

>and they didn't have anything with this type of lid. Lady told me that she remembers them having something like I described during the Christmas Holidays.

Par for the course, o'course. :)

Re: Pot Pourri Lids/Covers

#9

Re: Thanks for the info, Keith...

Allen Neighbors

>I'll keep that info in mind for my next order.

Is Normal normal this time of year? :)

Re: Pot Pourri Lids/Covers

#10

Re: Pot Pourri Lids/Covers

eliot d

>Allen, I once made a pot pourrie "vessel" entirely on the lathe. It's just a bowl with a lid that has a number of "spokes". The best way I know to describe the method of making the spokes is to find out about Smith's method of making open segmented vessels. Then just make one layer for the lid. What you end up with is nowhere near as fancy as the ones you can buy, but you have the satisfaction of making it entirely on the lathe. The one I made had a rosewood bottom and yellowwood for the "spokes"-- about 8 inches across and 3 inches high.

Re: Pot Pourri Lids/Covers

#11

Re: Pot Pourri Lids/Covers

Allen Neighbors

>Thanks for the info, Eliot. I have admired segmented pieces since the first one I saw. But I surely have not had the guts -- or the patience-- to attempt any of it.

But... piercing's another story... thanks for the ideas. :)

Re: Pot Pourri Lids/Covers

#12

Not since Saturday...

keith zimmerman, Normal, IL

>Graduation day at the University ws Saturday. Students are now gone for the summer so the town belongs to the citizens again.

Normal is the nine months of school when the population is 20,000+ larger than during the summer.

Keep turning

keithz

Re: Pot Pourri Lids/Covers

#13

Re: Pot Pourri Lids/Covers

Peter Hyde

>Allen, why not try one of these? This is the work of Tom Hurst who is a member of the Golden Horseshoe Woodturners Guild. He did a demo for club members last year and it is not that difficult. Dave Springett also demoed the same idea, and lots of other good stuff, this year for us.


img

Re: Pot Pourri Lids/Covers

#14

Re: Pot Pourri Lids/Covers

Allen Neighbors

>Peter, thanks for posting this! Some gorgeous work! It looks pretty frail. Assuming I'd have 20-30 free hours.... :)

Is the lid insert turned on four centers? Turned while centered on the back side, then inverted and turned on the other three centers? I wish I'd seen a demo of it; But, depending upon your answer to my questions, I may have to give this a try. It would sure be nice to know what I'm doing. :)