We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>I am a 61 years young male and recently retired. I have been working for a number of years; mainly making furniture, etc. Years ago I tried woodturning and wasn't interested. I went to a woodworking show a short time ago and got to talking to some old farts doing woodturning and now I want to get into it a lot more. I ended up buying a midi-lathe [General] with variable speed instead of a drum sander. My question: I have contacted some people in woodturning near where I live; [Port Orchard, WA] and will be learnign from some of the guys. I want to get a good set of turning tools but don't have the money to get a top-of-line set; what should I buy??? I can do my own grinding and sparpening. I want to learn how to make bowls and small things at first. Help me out with some good suggestions.
>Its very easy to get hooked onto the "I must Have the best tools I can aford" way of thinking, but as a reasonably inexperienced turner myself I think there's nothing wrong with having a few real cheepies to learn to sharpen with. You can grind away at them as much as you like and find out the shape that suits you best and often they can be made to cut OK. Don't buy sets,except maybe for a real cheap china special and as you find out what you really need get some better quality one's.I bought a second hand lathe complete with tools of varying quality from the best tool steel to carbon tools of varies makes and I find myself useing and enjoying carbon steel as much as I use the fancy tool steel gouges.
>I have tons of tools and some of them are really expensive, like those by Jerry Glaser and Rolly Monro (e.g. $ 209 for the Monro without a handle!) But I sometimes can't resist some of those deals like the set of eight HSS tools that I found one time in the bargain bin at Sears for $60. They work just fine. One of them is a parting tool cut at an angle that I use all the time when getting into corners, for example. The last response is exactly right. Start with cheapies, sharpen them carefully ( and probably often); then when you get as good as you are with flat work, start going to better tools. The best thing you can do is join a turning club in your area. Go to the AAW website and you will find the chapters nearest you. There is at least one chapter of the AAW in every state.
>If you can't find second hand tools, try the Benjamin's Best tools sold by Penn State. They are inexpensive and the steel is good. I am a tool addict and have one of everything -- but my workhorse has become the Benjamin's Best tools.(My experience has been with their bowl gouges, not their spindle tools -- so take that into consideration.) Another source of good inexpensive tools is Lee Valley, which has just brought out a line to complete with Benjamin's Best. Flutes are not as long, and I will only be trying them for the first time later today -- but they look good and you have the Lee Valley guarantee to back them up. In other words, if you don't like 'em, send 'em back. No questions asked.
>I would recommend that you join a club near you to get help in learning how to turn. You could also check and see if anyone knows someone in the club who has gotten out of woodturning and may want to sell their old tools. as you get more proficient, you may want to check with Doug Thompson(he posts on the board some) and get some tools from him. He makes very good tools at a reasonable price. I am not affiliated with him but have some of his tools and like them very much.
I agree with the above. If you want to go with a "set" of tools, I'd go with a cheap 'chiwanese' set first... to learn on.
You say you want to turn some small bowls, etc, first. I'd start by getting a 1/2" or 3/8" bowl gouge, a 3/4" skew, and a parting tool. I bought a Pinnacle 3/8" bowl gouge from Woodcraft... 37.95. I also have a Crown Pro-PM 1/2" bowl gouge... 79.95. They are both more of a Vee flute, as opposed to a "U" flute. I like them fine, but some turners swear by the U flute. You'll just have to decide which you like best.
I've already decided that my next bowl gouge will come from Doug Thompson, as mentioned above. He's a turner that got into making harder steel tools, and has been reported on this site as being the guy that gives the best service. He has both, Vee and U flutes.
There is a woodturner's website that tells you how to make some of your own turning tools, and I've followed his lead to make a number of tools that have saved me a lot of money. His name is Darrell Feltmate. I'll put a link to his site in this post, and you can check it out if you like.
>Kelly, this is a sport for the young at heart... LoL
The first thing to do is buy a basic set of cheaper tools then start turning some wood.
Second buy a Wolverine jig made by Oneway, Why? because it works. Packard has a package that sells for $150... this is a one time buy.
Third, ask other turners to show you how they turn and what tools they use, then you will see what can be done with each different flute shape. I'm talking bowl gouges. Try the tools that they use and find one you like then buy it.
For your size lathe a 1/2 diameter bowl gouge will handle any blank you will turn. Most people have a zillion tools but only use a select few. Find the few select tools by using other peoples tools first... this will save a lot of money.
>Harbor Freight HSS set...$39. This is the best buy I made. I have a bunch of others I paid far more money for, but I don't think anybody can go wrong with this set. I seem to reach for them as often as the more expensive ones. And if I mess up the grind, I haven't lost much.
This set does not include a bowl gouge. The Benjamin's Best, I think, is a good one to start with, but more experienced bowl turners might recommend others as the best bang for the buck.
I heartily second the Wolverine grinding jig set. It is a one time buy.