We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>I caught a short segment on The Woodworking Channel web page a few minutes ago showing a Japanese style of turning using a hooked type of tool working on the bottom of a project instead of the top. Cutting seemed to be as fast as our traditional gouge/top cut, and there seemed to be far less chance of a catch. Plus, chips were thrown down, not up. The tool rest was mobile, not fixed. Overall, it was intriguing.
Have any of you tried turning in this style? And what is the tool? I found something that looked similar at the link below, but I don't know if it is the same. I do know that I spent 15 minutes looking at Google hits for "Japanese Turning Tool" but found only this one.
Berger hollowing tool (BHT) is fabulous tool. But basically it is "just a gouge" in certain angle.
Japanese turning hooks are "real" hook tools. I'm not an expert either and I'm sure there isn't only one truth. However what I know about these tools and methods is that they work extremely well in this sort of turning and you basically can't use them any other way... steel is hardened and very very hard and also brittle. This with the fact that they are sharpened with very small bevel angle making tools "mouth" very thin mean that tools break easily. Also sharpening is art itself.
Somehow methods and tools (and of course culture behind that all) are beautiful. Also very very different than what we are used to see.
>The idea of using one of the hook tools I already have, or the Berger tool you googled which I also have, for spindle turning is intriguing to me also. I may give it a try. But all my hook-type hollowing tools cut on one side only, the left, so I'd have to make right-hand cutters as well. Oneway's Termite tool might be a good choice, it's a ring tool which can cut either way.
I have both tools also, I've never tried the Berger on spindle work, but the hook yes, I made myself several hook tools, some one edged, some double edged, and they work really nice on spindles and make a very smooth cut. They are limited, but shallow coves or gentle convex shapes con be done besides the basic cylinder.