Bent wrench
Ruth Niles
>It's not bent a lot but you can see the curve, the jaws are really hard to tighten any more than shown.
Knowledge You Can Build On — Est. 1998
Bent wrench
Ruth Niles
>It's not bent a lot but you can see the curve, the jaws are really hard to tighten any more than shown.
Re: Bent wrench
Ruth Niles
>this picture shows the shiny area where it rubbed or bent or whatever.
Nice work.
Steve Kubien
>Ruth, I didn't know you had it in you. If we ever find ourselves walking down a dark alley, I want you on my team!
Steve Kubien
Ajax, Ontario
Re: Bent wrench
nailshooter
>I'm sorry Ruth, but I had to laugh at that wrench. I hadn't seen one of those models in years. But still, it is impressive to see you did really bend it!
I think you should take that to your shows to discourage hagglers or light fingered shoppers!
Robert
Re: Bent wrench
Ruth Niles
>It was my Dad's, I have a lot of tools and machinery from 1940's that were his and I love them all.
Just don't use the word "aggressive" when you tell anyone about me and this saga. : )
Bend it back
steve antonucci
>I'd be willing to bet that you can "cold set" it back into shape- same way you bent it, just the other direction!
Steve
Re: Bent wrench
Mac
>Ruth, Your Dad would be proud!!!
Re: Bent wrench
Wally Dickerman in Arizona
>I have a wrench like that that belonged to my father. Back in the 20's most cars came with a tool kit. They often included a couple of wrenches like that. In those days you needed tools if you owned a car. Ever heard the song "Get Out and Get Under"?
Wally
Re: Bent wrench
RevDoug
>First, I'm impressed. Not often that you see a pipe wrench that is bent. Secondly, am I all confussed or is that wrench bent the wrong direction? The force of the pull should have been in the direction toward the opening of the jaws, not away from them. Please somebody straighten me out if I'm wrong. ;)
Turn 'em round,
Re: Bent wrench
Leo Van Der Loo
>Hi Robert
There is a reason you don't see these kind of tools anymore, and Ruth just showed you one.
Have fun and take care
Leo Van Der Loo
That ain't a pipe wrench....
TDaniel
>Down here we always called that a "Monkey wrench". Anyone else ever heard it called this?
Re: Bent wrench
Leo Van Der Loo
>Hi Rev
yes it does look like that, and maybe Ruth did use it backwards, remember she put the wrench on the backside of the lathe and added the pipe, then tried to lift the pipe to unscrew the faceplate, so I assume Ruth had the wrench on the top, in that direction the back of the wrench had to take al the strain, and the outcome you can see.
These tools are noticeable weak and it was very common to see the jaws skewed like that.
Have fun and take care
Leo Van Der Loo
Can't, I'm not mad anymore! : )
Ruth Niles
>
Re: Bent wrench... Wally
Ruth Niles
>I heard my Dad sing a lot of songs when the car wasn't working right but none of them sounded that sweet! : )
Re: That ain't a pipe wrench....
George Van
>Same thing up here Terry! I was corrected when I was young and called a Crescent wrench the same.
You're absolutely right, Leo.
Ruth Niles
>
Yep,,,Monkey Wrench.....
Wally Dickerman in Arizona
>Left handed or right handed?
Wally
Re: Bent wrench
Molly Winton
>Funny.....the word 'aggressive' immediately popped into my head when I was reading this whole saga! Why is that?!? Now, I'm not saying this of all women, but is it just a girl thing??
Re: That ain't a pipe wrench....
jeff myroup
>I have heard it called that, but I think the proper name is "Ford wrench" although I could be wrong.
Jeff
Called Monkey wrench 50 years ago in Massachusetts
Clem Wixted, Jonesboro, AR
>
STOP IT!
Ruth Niles
>
oh good, because I have a Ford. ; )
Ruth Niles
>
Re: That ain't a pipe wrench....
Randy Johnson Connersville, IN
>Many wrenches that look just like the one Ruth bent do have Ford on them because they came out of a tool kit that was sold with a car or truck or tractor as has already been mentioned.
Monkey wrenches have smooth jaws that stay parallel and are often a lot beefier than the one being discussed. With the exception of fittings like unions that have a flat surface, a monkey wrench would be useless for plumbing. Pipe wrenches have serated jaws for gripping the round surface of pipes. Even new pipe wrenches have a lot more slop in the jaws than a worn monkey wrench.
My personal feeling, is that for many applications a monkey wrench is far superior to an adjustable cresent. I don't think they make monkey wrenches anymore so I have to be thankful for auctions and flea markets.
BTW, I've seen more than a few 18" pipe wrenches with bent handles and even one 36" with a broken handle. You don't have to be all that strong, ya just need a longer pipe.
now i see what your problem was ...
e
>you didn't have a REAL wrench!
Charles Moncky's Wrench
Ron in Drums PA
>Charles Moncky, who's nick name was "Monkey" invented the wrench somewhere in the mid 1800s. His follow workers always wanted to borrow Monkey's wrench. The name stuck.