Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

turning inlace *LINK*

Posts

turning inlace *LINK*

#1

turning inlace *LINK*

joaz

>I have been fooling around with inlace lately to find other ways to use it. This piece is about 1" diameter with a stone inset.(not sure what the stone is). I let the inlace harden in the cup and then turned it and inlayed the stone.

The stuff turns really nice allthou pretty smelly. Easy to sand. Used scraper mostly. When sanding, major protection is nessecary.

I will probaly inset this piece in a box top or as a hollow form top.

Next time I will try a larger piece.

Fun little project.


img

http://www.maine-web.com/woodturning

Re: turning inlace *LINK*

#2

Re: turning inlace

John Lucas

>Joaz You've discovered my secret. Don't tell anybody. I full dixie cups with the Inlace and then sand off the bottom so I can glue it to a scrap piece of wood or in some cased to the actual wood turning.

I've also drilled holes in wood and fill those for longer tubes. As you've probably found out Inlace is expensive. I always mix more than I need because it really sucks to run out when your filling a ring or void. I take the left over stuff and pour it into whatever container I have so I can turn it later. The smaller pieces make great colorful inserts for ornaments, boxes, etc.

Re: turning inlace *LINK*

#3

good idea!

GaryG in MD

>

Re: turning inlace *LINK*

#4

Re: turning inlace

Steve Russell

>Hello,

Although the picture is a bit blurred, the stone appears to be Leopard Jasper. I use it quite frequently in inlays. Nice stone and very interesting patterns. Take care and all the best to you and yours!

Steve Russell

The Woodlands, Texas