Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

simple metal adapter

Posts

simple metal adapter

#1

simple metal adapter

eliot d

>I was surprised how easy it was to make a small metal reducer that allows me to insert a 3/8 inch shaft in a 3/4 inch round tenon. I know for those of you with a metal lathe that this is just child's play, but I was fairly intimidated at first. But all it took was getting a length of mild steel 3/4" round stock from the hardware store, cutting off a few inches with a hack saw. drilling a 3/8 hole using my wood lathe and a Jacobs chuck, drilling two small holes at right angles for the set screws, and tapping two 1/4" x 20 threads into the small holes to accept two 1/4" x 20 small Allen head set screws. I did do some truing up with carbide cutters and a file; but honestly , it was easy, and it works perfectly. This may not sound like much, but it enables me to hollow through a much smaller hole while still using some of my larger constraining rigs and arm braces.

Re: simple metal adapter

#2

Re: simple metal adapter

john lucas

>Eliot Now your sunk. I started out that way. I would hacksaw and file slots, drill several holes and connect them with jewelers saws and files to make longer slots, drill, ream and then file holes larger and then your hooked. Now I have a forge, small welder, metal lathe and mill, antique powered hacksaw, Oh god it's just as bad as wood turning. Once you get the bug your hooked.

Re: simple metal adapter

#3

Re: simple metal adapter *LINK*

Darrell Feltmate

>YES! Good going Eliot. Once you make the decision to try it is amazing to this old boy how many tools you can make and modify in the home shop. One of the fun parts of turning for me is to realize I do it with tools I make myself. One of these days when I am rich and famous (neither likely) I have to get a metal lathe and milling machine. Now that will be fun. For only a couple of thousand dollars I could have a couple of new face plates and maybe a tool rest.


Around the Woods

Re: simple metal adapter

#4

Re: simple metal adapter

Brian Hahn in SW Wisconsin

>Welcome to the world of custom tools.

Being able to customize your tools and make special ones opens so many options. You are no longer limited to the standard tools in the catalog!

Re: simple metal adapter

#5

Re: simple metal adapter

Doug Thompson near Cleveland

>A mill, lathe and a surface grinder is all that is needed in a home shop. Newspapers or craigslist.com is a good source to find a good used machine, most can be bought for 1,000 or less. In this day and age of carbide inserts you don't even need to sharpen the tools.

Eliot, good thinking... woodworking tools can be use for light metalworking.

Re: simple metal adapter

#6

Re: simple metal adapter

eliot d

>Doug, Thanks for the tip. I have been thinking about a metal lathe for a while now.

I didn't quite understand what you meant when you said that the carbide inserts didn't need sharpening, though. Do you mean the ones used with metal lathes, or do you mean that the ones put into the tools that you make yourself won't need sharpening? (Perhaps I don't understand what a carbide insert is.)