Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Fluted & Black Wax 5230

Posts

Fluted & Black Wax 5230

#1

Fluted & Black Wax 5230

Bruce Forrest

>This is an ash hollow form which has been fluted, sandblasted, dyed and treated with black patinating wax to accent the grain. It measures about 8 7/8 inches in height. Another experiment with orange and black.

All comments welcome.


img

Re: Fluted & Black Wax 5230

#2

Re: Fluted & Black Wax 5230 *LINK*

joaz

>I really like your work. Very organic. I can apprciate all the work that went into this creation. This is a very unique approach to turning.Keep it up. Beautiful!!


http://www.maine-web.com/woodturning

Re: Fluted & Black Wax 5230

#3

ebd

Re: Fluted & Black Wax 5230

ebd

>Really dramatic & eye catching.

Re: Fluted & Black Wax 5230

#4

Re: Fluted & Black Wax 5230

Ralph Watts

>Ken,

Best piece of ash that I have seen in a long time!! I would be interested in the method(s) you used to make the flutes...

Best regards, Ralph

Re: Fluted & Black Wax 5230

#5

Re: Fluted & Black Wax 5230

Bruce Forrest

>The flutes were started with a router mounted on a sled. I posted a couple of pictures of the setup here not too long ago, so if you search posts that I have made it should come up. Router slides on a table attached to the ways of the lathe. Spacing is done using the index wheel on the lathe. That provides the basic flute. Then it's further shaped and rounded over using a microplane rasp and other rasps, sanded etc.

Re: Fluted & Black Wax 5230

#6

Bob Moffett

Re: Fluted & Black Wax 5230

Bob Moffett

>That is awesome!!! I realy like the flutes and color. How thick were the sides before you started carving the flutes? Did you carve them by hand or use a power tool?

Re: Fluted & Black Wax 5230

#7

Re: Fluted & Black Wax 5230

Bruce Forrest

>Thanks for the comments.

The wall was about 1/2 inch thick before the fluting. Has to be much thicker than usual so the flutes don't go all the way through. (Although I have done several slotted pieces.) Flutes were started with a router while the piece was mounted on the lathe, using the indexing. This gets them in the right place. Then they were finished by hand. (Microplane rasp, rasps, etc).

Re: Fluted & Black Wax 5230

#8

Re: a ?

Mike Hamilton

>I love the way the grain looks on this piece and am curious - was the pith included in the blank or not? I'm trying to imagine what the grain looks like as you turn the piece.

Regards,

Mike Hamilton

Plainfield, IN

Re: Fluted & Black Wax 5230

#9

Re: Fluted & Black Wax 5230

eliot d

>Oh, this one is a knockout! I'm having trobule getting over it.