Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Pulled this Elm platter out of my drying cabin,

Posts

Pulled this Elm platter out of my drying cabin,

#1

Leo Van Der Loo

Pulled this Elm platter out of my drying cabin,

Leo Van Der Loo

>this afternoon, and finish sanded it and put one coat of tung on it, more to go yet.

Just over 17"D and 3" high.

All comments welcome.

Have fun and take care

Leo Van Der Loo


img

Re: Pulled this Elm platter out of my drying cabin,

#2

Leo Van Der Loo

Re: Pulled this Elm platter out of my drying cabin 

Leo Van Der Loo

>


img

Re: Pulled this Elm platter out of my drying cabin,

#3

Bob Moffett

Re: Pulled this Elm platter out of my drying cabin

Bob Moffett

>Very nice smooth shape. I would like it even better if it was slightly hollowed out under the lip.

Re: Pulled this Elm platter out of my drying cabin,

#4

Leo Van Der Loo

Thank You Bob, it is concave Bob, pic. does't show

Leo Van Der Loo

>

Re: Pulled this Elm platter out of my drying cabin,

#5

Re: Pulled this Elm platter out of my drying cabin

Mike Cunningham (Cape May NJ)

>Very nice Leo, I like the curve at the rim shown in both photos.

Mike

Re: Pulled this Elm platter out of my drying cabin,

#6

Leo Van Der Loo

Thanks for the response Mike, I do appreciate it.

Leo Van Der Loo

>

Re: Pulled this Elm platter out of my drying cabin,

#7

Re: Pulled this Elm platter out of my drying cabin

C.W.Stivison

>Hi Leo,

Platter looks good. How many coats of tung oil are you going to put on the platter.

CW

Re: Pulled this Elm platter out of my drying cabin,

#8

Leo Van Der Loo

Re: Pulled this Elm platter out of my drying cabin

Leo Van Der Loo

>Hi CW, and thanks, how many coats ??, good question, I really don't know beforehand, I have stopped with 2 at times, and 3 or 4 at other times, it just depends a lot on the wood and what I feel looks good, I had one Walnut bowl that I lost count on, but I am sure there were more than 6 coats before the bowl looked right.

You do have to make sure that your coats are cured before you put the next one on.

On the left hand side of your screen you can find under "Other articles" ,"Russ"s corner" I would recommend you have look there, for there is a whole lot of info on finishing and more.

Have fun and take care

Leo Van Der Loo

Re: Pulled this Elm platter out of my drying cabin,

#9

Re: Leo- as a matter of practicality,...

Jamie Donaldson

>.. it appears that the rim edge is rather sharp, and I like Ray Key's theory that handled objects should be friendly to the hands. Sharp edges also show every ding and nick and soon become ugly!

Re: Pulled this Elm platter out of my drying cabin,

#10

Leo Van Der Loo

Thanks for the resonse Jamie, the picture does not

Leo Van Der Loo

>do a good job of detailing the bowl, however the edge is not thick and round,but rather thin and slightly rounded, that's is a natural result from a shape like this.

Of course this shallow bowl is hardly going to be used like a tossed around salad bowl, and if the person that buys that $200.-- bowl wants to tread it rough, he/she is entitled do that, and do probably less damage than if they did that with a crystal bowl IMO :-)))

Have fun and take care

Leo Van Der Loo