Walnut Hollow Form from Semi-lurker Reposted
Bob Moffett
>I'm reposting this because my first picture was to small. This is 4 1/2" at the widest point, 8 1/4" tall with a 1 3/4" foot hollowed to 1/4". It got sort of tense near the end of the hollowing process. It is made in 2 pieces and then glued back together. It was turned green and finished with 3 coats of semigloss Waterlox and 3 coats of gloss Waterlox and then buffed with a Beal buffing system. I am learning how to make these so any comments would be appreciated. Thanks in advance.
Bob



