Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

In Praise of Moffatt Lights *LINK*

Posts

In Praise of Moffatt Lights *LINK*

#1

In Praise of Moffatt Lights *LINK*

Jennifer@Indy.USA

>I've been eyeing the Moffatt lights for some time now. Probably a few years really. After working with them daily a few weeks ago at Marc Adams, I realized just how handy and well made they were and I went out and bought one at Woodcraft the other day. It's one of those purchases that you just say why did I wait so long to buy this? I bought the 18" one with a magnetic base so I can stick it on a vertical part of my General down by the tail stock. It is wonderful. the magnet is super strong. It can take up to a 100 watt bulb and is bright, easily moved and adjusted, and doesn't get HOT so when you grab the housing to adjust it, you don't fry your hand. For the past 4 years I've use a double headed shop light that was really hard to get in the right spot. It stinks for hollowing because my shadow is always in the way. I think I'll buy a second Moffatt here in the near future only this time get the 24" one. Then I'll put the shorter one up at the head stock and the longer one at the other end. If you've been thinking about trying these lights...go for it! You'll love them!

Jen


MOFFATT LIGHTS

Re: In Praise of Moffatt Lights *LINK*

#2

Mike Stafford

Re: In Praise of Moffatt Lights

Mike Stafford

>That is exactly the arrangement I have with my Moffatt lights, one on the tailstock end and one on the headstock. I was working in the dark until I got my Moffatt lights. It does not matter how many overhead lights you have because they do not allow you to see into your work. Moffatt lights do!!! Unsolicited testimonial as I have no affiliation with Moffatt lights or anyone or anyplace that sells Moffatt lights. Just a happy user....

Re: In Praise of Moffatt Lights *LINK*

#3

Re: Save A Few $ *LINK*

Mark Mandell - Gone Round In Jersey

>I bought mine from Gary Sanders.

Nice guy.

Good Price and service.

No connection.


Turningwood.com

Re: In Praise of Moffatt Lights *LINK*

#4

Re: In Praise of Moffatt Lights

Dennis Daudelin

>Lots of light and a good magnifier are key parts of my shop!! I use 2 Moffatt lights in order to see my turnings. The 4' dual florescent lights set a couple of feet above the lathe just aren't good enough to see turning details and surface imperfections. And forget trying to do miniatures like this:


You can get the lights in many places but I bought mine from Steve Worcester's site. The lights are mounted on stands and wired for ease of use. It saved me from the sourcing of the parts and building it out. I'd rather turn instead. You can see them here:

Light stand website

I have no affiliation with them, just a happy turner!! And couldn't do it without more LIGHT!!

Dennis

Re: In Praise of Moffatt Lights *LINK*

#5

Re: In Praise of Moffatt Lights

Tommy Holmes

>Amen! I love my two.

Re: In Praise of Moffatt Lights *LINK*

#6

Re: In Praise of Moffatt Lights

john lucas

>I now have 3 moffet lights and I really love them except for one thing. If you get to close to them they are hot, expecially in the summer. That's why I would like to try one of the LED lights from England. It looks like it would give you the same thing as the Moffet Lights with run cool and the head is smaller.

I bought mine from Gary Sanders and he is a great guy to deal with. I also bought the light mounting system to fit my Powermatic. It has a place to plug in AC tools and an extra arm to hold my dust collector.

Re: In Praise of Moffatt Lights *LINK*

#7

Re: In Praise of Moffatt Lights

Wayne Leach-NW Ontario

>Very timely Jen, I was looking for something better and cooler than halogen! Thanks for the info.

Regards, Wayne

Re: In Praise of Moffatt Lights *LINK*

#8

Re: In Praise of Moffatt Lights

robo hippy

>I also really like mine. But then I got one of the Full Spectrum lights advertised in Woodturning Design. What a difference those lights make in what you see as well as brightness. Now if they had a bulb and stand that would do what the Moffit lights do.

robo hippy

Re: In Praise of Moffatt Lights *LINK*

#9

Re: In Praise of Moffatt Lights

Larry Bisbee

>I had two Moffatt lights and also purchased the light mounting system from Gary Sanders. It makes a great lighting system for my lathe and love it. I have had to replace the light switch twice in the Moffatt light fixture. The manufacture has replaced the switches for free each time and the last time included a rubber cover for the switch. Haven't had any more problems with the light. Just take care when using an air hose to blow the dust off the light.

Re: In Praise of Moffatt Lights *LINK*

#10

Re: Save A Few $

Jennifer@Indy.USA

>Mark, I'm going to order the next one from Gary. I had a discount coupon for my local Woodcraft so I used it. They don't carry the longer versions so I'll need to go elsewhere. I just put the Moffatt link up there so those who weren't familiar could scan the manufacture. Thanks for putting Gary's link!

Let there be light!

Jen :)

Re: In Praise of Moffatt Lights *LINK*

#11

I Love Mine!!!!!!!!!!!!!!

Barbara Gill, Remlik VA

>I have the double set.

Re: In Praise of Moffatt Lights *LINK*

#12

Help Larry, I'm in the dark!!

Molly Winton

>Hey Larry, did you have to change out your light switches because the light just stopped working? That's happened to me and I'm so frustrated. I can't figure out why it stopped working. I bought it from Gary last year in Louisville (or was it Kansas City?), anyway...did you just contact Gary for help?

Re: In Praise of Moffatt Lights *LINK*

#13

Re: Help Larry, I'm in the dark!! *LINK*

Larry Bisbee

>Molly, The answer to your question is 'yes'. I checked the bulb and it was okay, so I decided it had to be a problem with the switch. I contacted Moffatt 1-800-346-0761 and explained to them my problem. They mailed me a new switch immediately and at no cost to me. When I went to replace the switch the first time using their instruction I had a problem and called the Moffatt Rep for additional instruction, which he Emailed. I have always found them to be extremely helpful. GOOD LUCK! Email me if you have any additional questions.


MOFFATT PRODUCTS

Re: In Praise of Moffatt Lights *LINK*

#14

Re: In Praise of Moffatt Lights

Tommy Holmes

>I use the REVEAL light bulbs made by GE. They are "enhanced color spectrum" and it makes a huge difference. The light looks white and not yellowish like other incandescent bulbs.They are are easily available and just a few dollars for a pack of four. I have bought them at Home Depot and Wal-Mart.