Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Segments - Tip 2

Posts

Segments - Tip 2

#1

ebd

Segments - Tip 2

ebd

>I thought that it might be attractive to not only expose the top of the segment ring but to make the join to the solid bottom piece beneath the curve. Boy was I wrong. 1. It makes the curve at the join look discontinuous rather than smooth. 2. It makes the piece look very top heavy. 3. It just looks unnatural to me (it reminds me of an acorn). You can bet I won't try this again - especially with Bolivian Rosewood and Zebrawood. If I had kept the join above the curve I think it would have been a decent piece. My screwup relagated it to a throwaway. I apologize to the trees involved. My BAD!


img

Re: Segments - Tip 2

#2

Re: Segments - Tip 2

Bill Hale / The Wood Spinner

>I don/t know that it is the join. In my eye it is the balance of the total piece. The final is to heavy looking and the bottom is to small. I would remount the top and turn down the final and make a new ,larger , bottom. Posibly put a layer of the dark in the center of the Zebra base.

Bill in Casa Grande, AZ.

Re: Segments - Tip 2

#3

ebd

Re: Segments - Tip 2

ebd

>Actually the piece has the same basic curves and proportions as the ones in the 1st tip.