Hop-Hornbeam platter 9"
Leo Van Der Loo
>Turned and soaked in paint thinners, dried and sanded, 1 coat of pure Tung oil so far.
Comments welcome
Have fun and take care
Leo Van Der Loo
Knowledge You Can Build On — Est. 1998
Hop-Hornbeam platter 9"
Leo Van Der Loo
>Turned and soaked in paint thinners, dried and sanded, 1 coat of pure Tung oil so far.
Comments welcome
Have fun and take care
Leo Van Der Loo
Re: Hop-Hornbeam platter 9"
George Van
>Leo, I like the bead on the rim. I have to try turning some of this wood, when I use it for canthook material it checks badly. This does not effect the strength for handles and will take a lot more abuse than the hickory handles that come from the factory.
Re: Hop-Hornbeam platter 9"
Jorge Castaneda
>Nice platter Leo.
Nice looking wood too, I like turning hop hornbeam, but never got any piece that big, hard, one of the iron woods.
What does the soaking in paint thinner? Was it green?
TIA
Jorge
Re: Hop-Hornbeam platter 9"
Leo Van Der Loo
>Thanks George, the wood turns really nice, the grain is often blahh though, spalted I like it better, but this one had a lot of bugs in it, had been standing dead for a few years already.
Yes very good tool handle wood, back home they used White Oak branch wood for canthook poles, the people I knew anyway. and that was half a century ago by now, wow where did the time go.
Have fun and take care
Leo Van Der Loo
Re: Hop-Hornbeam platter 9"
Leo Van Der Loo
>Hi Jorge, thanks for the response, yes it was a fairly large one, though they do get bigger than that, but it takes a long time, yes turns really nice, grain is not always that great though.
The pain thinner soak was to kill of the bugs, as this tree had been standing dead for a while and had wild live in it, a soak does take care of that.
Have fun and take care
Leo Van Der Loo
Re: Hop-Hornbeam platter 9"
Wayne Leach-NW Ontario
>Leo,
I really like the style of this platter. The spalt and the little "critter" marks give it character. Very striking! I was going to enquire about the thinner but saw it was answered in another post.
Thanks for showing it.
Wayne