Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Hey Gary G from MD! *LINK*

Posts

Hey Gary G from MD! *LINK*

#1

Hey Gary G from MD! *LINK*

Mark Mandell - Gone Round In Jersey

>Ran across this in connection with another search. Thought of you and the remote power switch thread last month. Glue on a magnet and you might be good-to-go with this on the inexpensive (but not cheap) side of the issue.

|;-}}

mm


Lathe Power Switch

Re: Hey Gary G from MD! *LINK*

#2

Re: Hey Gary G from MD!

GaryG in MD

>Hi Mark,

Hey, thanks. Interesting link. That looks like a good possibility -- I'll have to talk to their tech people and see which way it works, although I would assume that down is off, which would be good. I'd probably glue on a bigger paddle to make it a bigger target.

They also have a link for a "safety switch", but it needs more explanation and is more expensive.

Thanks for the excellent tip.

Cheers, Gary

Re: Hey Gary G from MD! *LINK*

#3

Re: Other One

Mark Mandell - Gone Round In Jersey

>Yes, I saw the other switch they have with the bail handle, but it's near $40 and seems like it would have to be mounted in the vertical position to be used. That mounting requirement looks like it would limit application as a moveable switch too much.

Cheers

mm