Re: Curly Rock Maple Platter
Bob Fawcett
>Simply beautiful.
What a great platter.
Knowledge You Can Build On — Est. 1998
Re: Curly Rock Maple Platter
Bob Fawcett
>Simply beautiful.
What a great platter.
Thanks Jamie!
Jorge Castaneda
>
Re: Curly Rock Maple Platter
Jorge Castaneda
>Mark,
I admire too those that have the vision, discipline and determination to get a PhD, I told her she is my hero.
Thank you!
Jorge
Thanks Brad!
Jorge Castaneda
>
Thanks Bob!
Jorge Castaneda
>
nice job!
Dominic Greco in Richboro PA
>Jorge,
When I first looked at this photo, I thought that it could have benefited from some beads turned into the front. However, as I looked at the other photos (back view and overhead) and got a better idea for the shape, I realized that anything more than what you had done would have distracted away from the beauty and simplicity of the platter. What a great gift this will make!
It's so beautiful (front and back), I was wondering if you thought of making a stand so that your daughter could display once side, then flip it over to display the other.
I use a simple platter/bowl stand designed by Bill Neddow and featured on WOW. If you're curious, check out my most recent post showing my Textured/Burned Cherry bowls.
See ya around,
Dominic
Hi Dom!
Jorge Castaneda
>Thank you,
our advice is quite timely, yes, I was thinking of a stand in my mind I was seeing scroll work on thin wood, Is yours metal?
Take care
Jorge
Wooden stand
Dominic Greco in Richboro PA
>Jorge,
The stand is wooden and is easy enough to make in under an hour. It has 3 major pieces. The upright which is made from 3/4" x 3/4" wood, and the two "legs" that are made 1/2" dowel and 3/4" dia wooden spheres. The dowel and wooden spheres were purchased at Michaels Crafts or AC Moore.
You size the length of the upright to be just under the diameter of the bowl (you don't want to see it when the bowl is displayed). The length of the legs will determine the angle the bowl is to be displayed. I usually cut the upright, drill the holes, and dry fit the legs to see how they work. Dry fitting is also important to make sure the assembly is balanced and that the bowl or platter will not fall over when placed on the stand.
I like to make the the upright from a contrasting piece of wood. A taper, starting about 1 1/2" up from the bottom is planed in all four sides. After drilling, the upright is sanded, sealed, then lacquered (but you could apply an oil finish just as easily). After they are cut to the right length, the legs are sanded, sealed with shellac, and then painted black with India ink. The entire assembly is then glued together.
If you want to make it look metal, it would be easy enough to paint the entire assembly black. I think that would look cool.
I've attached some photos that might help.
My favorite wood
steve antonucci
>I love figured maple. It's kind of the local "home team wood", but you really can't beat curly and birdseye maple.
Congrat on the Ph.D. for your #1 Daughter. From now on, if someon asks is there a doctor in the house, you can say yes :-)
Steve
Beautiful, Jorge, Beautiful!!!!
Jim K in Trappe PA
>
Those soft curves make the wood look so silky
Leo Van Der Loo
>A piece like that doesn't need anything else, it's a real beauty Jorge, I love seeing those pic's.
Thanks for showing
Have fun and take care
Leo Van Der Loo
Re: Those soft curves make the wood look so silky
Jorge Castaneda
>Hi Leo,
It really is silky, people just keep caressing it.
Thanks
Jorge
Cool
Jorge Castaneda
>Neat design!
Thank you Dom
Jorge
Re: My favorite wood
Jorge Castaneda
>Hi Steve,
Yes figured hard maple is hard to beat as an atractive wood.
I'll try to remember that crack about the doctor...He, he.
Thank you
Jorge
Gracias Jim
Jorge Castaneda
>