Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Dyed Poplar Pot

Posts

Dyed Poplar Pot

#1

Dyed Poplar Pot

Bruce Forrest

>I recently found a source for some nice orange aniline dye. This is the result of some experimentation with it and some black. The piece measures 7 7/8 inches in diameter by 7 1/2 inches tall.

All comments are welcome.


img

Re: Dyed Poplar Pot

#2

Question

Bernie

>Very nice Bruce the orange and black is awesome.

I just finished a poplar bowl 14" dia that I

dyed the outside blue. What grit do you sand to

after the dye is applied and are you using a

laquer finish? I am tempted to leave it alone,

I kind of like the raise grain feel on this bowls

outside.

Thanks,

Bernie

Re: Dyed Poplar Pot

#3

Re: Question

Bruce Forrest

>I usually raise the grain with water before dyeing and then sand lightly with 320. Sometimes for effect, I dye and then sand off parts of it, cover with another color etc, but when all the dyeing is finished, I generally lightly sand with 400.

The finish is Minwax wipe-on poly. The poplar really soaks it up,so it takes quite a few coats. I lightly sand with 400 between the first few coats and with 600 between the last few.

Re: Dyed Poplar Pot

#4

Thanks Bruce, I'll give it a try

Bernie

>