Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Bois d'Arc Potpourri Pot

Posts

Bois d'Arc Potpourri Pot

#1

Bois d'Arc Potpourri Pot

Allen Neighbors

>Here's one of two potpourri pots I made today. Bois d'Arc, 5"dx3"h, 3/16" thick, inside and out sanded to 400, lacquer wash, buffed with Carnauba.

This is the first one I ever made. Don't know that the form is right, but my Sweetheart likes it. :)

Outside shot, because I didn't have room or time for the tent today.

Critiques, please.


img

Re: Bois d'Arc Potpourri Pot

#2

Re: Lower view

Allen Neighbors

>Same pot, different view.


img

Re: Bois d'Arc Potpourri Pot

#3

Re: Bois d'Arc Potpourri Pot

Bill Howatt

>I like the form although maybe a little flat at the middle. I think you recessed the top a little too much for my taste.

Bill

Re: Bois d'Arc Potpourri Pot

#4

Re: Lower view

Bill Hale

>I agree. The recess is a little deep. You might have enhanced it a little with a champfer and a groov etc..

Sides are a little flat.

Put a light behind your work as you turn and you can see these things better.

Bill in Show Low, AZ.

Re: Bois d'Arc Potpourri Pot

#5

Leo Van Der Loo

At only 3/16" thick you're not goingto change this

Leo Van Der Loo

>one very much Allen

Ball or sphere, doesn't look good sitting on a surface IMO, I'd rather see a form that's wider at the lower half, or a flying saucer shape, but that's just me Allen, a more important person does like it, so you can't be to far off.

You got any more of that beautiful OO Allen, just give it another go, and don't forget,

Have fun and take care

Leo Van Der Loo