Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Multi Axis Turning

Posts

Multi Axis Turning

#1

Multi Axis Turning

Jim K in Trappe PA

>I mentioned to my wife that I felt like I was in a rut and need to do something completely different, so I'm going to try multiaxis turning. She didn't really understand what multi axis turning was, since she had never seen it, and I had never done it myself, so I said "let me give it a try, and I'll show you what it is, if it works."

So I gave it a shot, and showed her. I answered her first question with "Yes, I did it all on the lathe. I answered her second question with "No, those are arms folded in front, kinda like yours are now, darlin."

She said I'm spending too much time in the basement. Man, I'm just tryin to learn, that's all.


img

Re: Multi Axis Turning

#2

Re: Multi Axis Turning

Jim Shaver - Oakville, Ontario

>Hi Jim,

Don't you just love Spindle turning!

Nice work on the legs, nice definition..

Take care,

Jim

Re: Multi Axis Turning

#3

Re: Multi Axis Turning

Denis Putland from Saskatchewan

>Jim

you made my day:):) Week I mean:):)

I sure hope you post your moult axis turnings when you finally figure out how to do it???

Thas just great.

Denis

Re: Multi Axis Turning

#4

Re: Multi Axis Turning

Jennifer@Indy.USA

>Jim, it took me a minute...but I have to admit....I got a pretty good laugh out of this :)

Jen

Re: Multi Axis Turning

#5

Leo Van Der Loo

LOL,yes your spending to much time down there

Leo Van Der Loo

>

Re: Multi Axis Turning

#6

Re: Multi Axis Turning

tm

>Vavoom!

My wife always accused me of modeling my turned boxes after

certain parts belonging to her.

Maybe i did... unconsciously.

They say the forms of some musical instruments are fashioned after the feminine form.

Go figure.

tm

Re: Multi Axis Turning

#7

Re: Multi Axis Turning

MountainMan

>Jim - you got all of the proportions perfectly!!! Great fun!!

Re: Multi Axis Turning

#8

Re: Multi Axis Turning

Brian Simmons, Heflin, AL

>I attempted this 3 axis vase, turned then carved (wood is mimosa).

I was going for a tree trunk with two limbs each would hold a test tube to make a unique vase. I brought it in and my wife started laughing. I said that she just had a dirty mind. I then showed it to my 5 year old daughter who said "it looks just like Barbie's butt". Oh well it is at least a conversation piece.


img

Re: Multi Axis Turning

#9

Re: Multi Axis Turning

Jorge Castaneda

>Very interesting, I've done a wee bit of multi axe turning, nothing fun like yours, just coffe table legs,

You did very well for a first try.

Thanks for showing

Jorge

Re: Multi Axis Turning

#10

LOL!!! Your wife is right!......nicely done

Molly Winton

>

Re: Multi Axis Turning

#11

Steve Kubien

You need to get out more.

Steve Kubien

>Nicely done.

Steve Kubien

Re: Multi Axis Turning

#12

Re: Multi Axis Turning

Russ Babbitt Jr.

>Way to go Jim. Now the wives know why so many spend so much time in our shops. Very nice. Was this of your own design or did you have instructions to go by? That would be great fun to try.

Re: Multi Axis Turning

#13

Re: Multi Axis Turning

georgetroy

>After 50 years I still can't please my wife, darn if you do, darn if you don't. I don't think she understands boys and their toys. GT

Re: Multi Axis Turning

#14

My own design

Jim K in Trappe, PA

>It was my own idea. I traced a sillouette onto a piece of flat maple (~2x3x12), and removed all of the flat parts.

Jim

Re: Multi Axis Turning

#15

Re: Multi Axis Turning

Mark Paulley

>Jim,

Ask you wife if she would rather see in the basement or out all day on the golf course! My wife states I spend way too much time out in my shop. But I tell her I don't gamble, I don't golf and don't chase wommen. So she is lucky to know whrere I am at most times.

Keep turning!!!!!!!!!!!!!!!!!!

Mark