Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

NE Walnut HF

Posts

NE Walnut HF

#1

NE Walnut HF

Curt Fuller

>This was one of the biggest PITA pieces of wood I've worked with in a while. I think it was too dry and brittle or something. It's from a small walnut log about 7" diameter. I mounted it on a bias so the pith runs at a diagonal from the bottom to the top. But for some reason I couldn't keep from getting tear out and even had a hard time sanding it out. 80 grit seemed to even cause tearout. But the bark stayed on with the help of some CA at least. It ended up about 6" x 6" with a little soldering iron burn around the lip. Deft semi gloss finish. Wish I could have gotten a better overall finish.

Also, my wife made me a new background for my photos. It's a full size sheet of watercolor paper with a sepia wash she painted on it. What do you think?


img

Re: NE Walnut HF

#2

A different angle 

Curt Fuller

>


img

Re: NE Walnut HF

#3

a beautifil piece

robert davis

>

Re: NE Walnut HF

#4

Re: A different angle

John Pickett

>I really like the rim

Re: NE Walnut HF

#5

me too !

tek-Brunswick, Ohio

>

Re: NE Walnut HF

#6

Steve Kubien

Re: NE Walnut HF

Steve Kubien

>Despite the trouble you had, it turned out very nice. I too lovethe rim.

Steve Kubien

Re: NE Walnut HF

#7

Bob Moffett

Re: NE Walnut HF

Bob Moffett

>I really like that piece. I like the 1st picture the best. I like the rim, but I like the bark better. You have created a piece to be proud of! Well Done!

Re: NE Walnut HF

#8

Re: I love this PITA wood! :)

Allen Neighbors

>Despite the trouble, I love everything about this piece... the diagonally laying bark, the rim treatment (soldering iron?), and the form. Well done. I'd be proud to have this in my home.

Thanks for posting it.

Re: NE Walnut HF

#9

Brad Vietje

Re: NE Walnut HF

Brad Vietje

>Beautiful piece Curt -- and nice use of the bark -- glad you hung in there ! I don't know what you mean by a better finish -- more glossy ? It looks good on my laptop monitor, but maybe I don't have the resolution to see any flaws, since I don't see any. I'm not a huge fan of shiny, glossy finishes, especially when bark is involved, so I appreciate the softer sheen. The real difficult part of finishing natural edges is fighting round-over, and getting crisp edges. Looks like you've done pretty well there, too.

I think the burned detail at the rim relates very well to the dark color of the bark, and enhances the finished product.

Safe spinning,

Brad Vietje

Newbury, VT

Re: NE Walnut HF

#10

Curt, very nice work on pretty wood!!!

Gil Jones on Lake Seminole GA

>

Re: NE Walnut HF

#11

Re: A different angle

Mike Nelson

>Curt, this is really a great piece, I like the form especially the rim treatment and using the bark inclusion as you did is unique and well done. If you are not satisfied with the finish (I don't see a problem) rub it with some steel wool and buff.

Re: NE Walnut HF

#12

Almost forgot,

Mike Nelson

>I think your wife did a fine job with the background, it goes very well with the turning. Mike

Re: NE Walnut HF

#13

Leo Van Der Loo

I love the shape, but find the bark a little

Leo Van Der Loo

>overpowering on this kind of turning, just my feeling.

Have fun and take care

Leo Van Der Loo