Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Who sharpens with the dreaded gray wheels?

Posts

Who sharpens with the dreaded gray wheels?

#1

Who sharpens with the dreaded gray wheels?

Bill Howatt

>Hi,

How many cheat a fate worse than the eternal fires of turning hell by sharpening with the dreaded gray wheels? I really am starting to wonder if all this white/pink/blue stuff is as essential as some think.

Thanks,

Bill

Re: Who sharpens with the dreaded gray wheels?

#2

The gray wheels I got from Oneway ...

Ed Moore

>are excellent! I recommend them.

I had a blue wheel with a high rating that I took off the grinder. I haven't checked yet, but I suspect that it was not the recommended hardness.

Ed

Re: Who sharpens with the dreaded gray wheels?

#3

Re: Who sharpens with the dreaded gray wheels? *LINK*

joaz

>I have been using them for a couple of years. 60 grit for grinding

and 80 for sharpening. Love 'em, never had a problem.


http://www.maine-web.com/woodturning

Re: Who sharpens with the dreaded gray wheels?

#4

I do !!!

John Pickett

>my garden hoe, my shovel, my axe and hatchet. Oh, and lawnmower blades.:)

Re: Who sharpens with the dreaded gray wheels?

#5

Leo Van Der Loo

I learned to sharpen on them 50 years ago,

Leo Van Der Loo

>and I still use them on my 10" 1725 RPM grinder, no problem if you know how, have also blue and white wheels for my 7" 3450 RPM grinder, and dislike the need to true the wheels often, compared with the standard wheels that need only occasional cleaning and even less trueing.

Have fun and take care

Leo Van Der Loo

Re: Who sharpens with the dreaded gray wheels?

#6

Re: Who sharpens with the dreaded gray wheels?

john lucas

>I learned to sharpen on gray wheels. I do have a set of white wheels and those are the ones I use most. The beggest problem with Gray wheels are they over heat carbon steels really rapidly. Since most of us turn with HSS today that isn't a problem. The other problem with gray wheels is they clog easily. Use your star wheel often to clean them.

If that's what you have I would continue to use them. If you upgrade to the white, pink or blue wheels I think you will enjoy sharpening more. You do have to true up the white and pink wheels more often but that only takes a minute or so. I don't have experience with the blue wheels yet so I can't speak of those.

I'm starting to experiment with belt sanders again. That's what i learned on because I didn't have anything else. I think with the the right belts and the right machine this would be a good way to go. You can quickly change grits and the belts don't need trueing. I haven't gotten far enough to find out the negative effects. The late Frank Sudol used a belt sander a great deal.

Re: Who sharpens with the dreaded gray wheels?

#7

Re: Who sharpens with the dreaded gray wheels?

Bill Neddow

>I work with a dreaded grey wheel. When I bought my new Steel City 8" bench grinder last fall, it came with one white wheel, and one grey. I immediately bought a new Oneway blue wheel. Before it arrived, I had the new grinder set up, and found the Steel City grey wheel worked just as well as the blue wheels on my old 6" grinder. Ii can't say that for all grey wheels -- but, for the time being, the new 8" blue wheel remains in its box in the cupboard.

Re: Who sharpens with the dreaded gray wheels?

#8

Re: Who sharpens with the dreaded gray wheels?

Russ Fairfield

>I have Aluminum-Oxide grinding wheels that are gray. Do I have to throw them away and buy white ones?

Re: Who sharpens with the dreaded gray wheels?

#9

Just spray them white :)

john lucas

>

Re: Who sharpens with the dreaded gray wheels?

#10

Re: No Russ, just spray them blue!!

Jamie Donaldson

>

Re: Who sharpens with the dreaded gray wheels?

#11

Didn't even have a grey stone

Jimiles-Charlotte, NC

>Bill: you obviously are starting to get the picture. Most of the sacred "conventions" in turning are one person's preferred opinion that starts getting passed around as fact. I sharpened for many years on my 3" x 21" belt sander turned upside down & held in the vise because that was all I had. It was said that this method would wear down tools a lot quicker. Well my 5/8 bowl gouge now has about 1/2 inch of flute left and I replaced it this year after 20 years of use.

If the new one lasts that long on my came with the Delta grinder grey stones I'll be happy.