Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

My lathe is alive again!

Posts

My lathe is alive again!

#1

My lathe is alive again!

Leppikallio

>This is why I haven't been able to turn lately however this has been nice project anyway. I finished wiring yesterday evening (no smoke or blue sparks and it even works!). Some minor details still missing. Today I fixed lathe to bottom plate and will make cover for the peep hole to controller box.

1hp motor controlled with frequency converter / inverter. 3/8" steel bottom plate, new motor and all those smaller pieces of steel must be good for stability, bad for mobility. However mobility was one goal to be able to take this with me. Couldn't be much uglier but "all go, no show"... paint job as well as some other decorations which will follow are that "show" part, I have this with me in some shows this summer.

Wiring this thing was quite interesting task mostly because I wanted to optimize that "controller box". So not much room, 10 feet of thin wire alone + all that "thick current" wire. Nerd factor is quite high, that inverter is neat. Even motor whining stopped when I raised switching frequency to 18kHz and enabled heat protection so that it will drop switching frequency as needed. This is one reason for that fan...


img

Re: My lathe is alive again!

#2

Steve Kubien

Re: My lathe is alive again!

Steve Kubien

>So, basically, you've taken a mini lathe, added 1/2 a horse (or so) and a variable speed component? That's really cool and may be something I'll try whenever I've got a bigger lathe to play with in the mean time.

Love it.

Steve Kubien

Re: My lathe is alive again!

#3

Re: My lathe is alive again!

Leppikallio

>You are absolutely right and you said it with much fewer words :)

And this is indeed my only lathe. It had little less power I would like to have and it hadn't variable speed (except step pulleys of course).

Re: My lathe is alive again!

#4

Re: My lathe is alive again!

E.T.

>How did you make out with the pulleys? Did you have them machined locally and how did you deal with the groove for the shaft key?

Re: My lathe is alive again!

#5

Re: My lathe is alive again!

john lucas

>What a great modification. I've wanted to do the same thing but have to wait until I get some extra cash.

Re: My lathe is alive again!

#6

Re: My lathe is alive again!

georgetroy

>Your hand will be dead, if you don't get a cover made for the exposed belt and pulley. All it takes is one time. Thanks for showing your makeover. GT