Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Poplar Bottle

Posts

Poplar Bottle

#1

Poplar Bottle

Bruce Forrest

>This is a poplar bottle-shaped hollow form. You could call it a big-necked cousin of the droplet-shaped pieces that I've posted. It measures in at about 10 inches tall. Not dyed because this wood had a bit of interest going for it. All comments welcome. (I just noticed a shadow in the picture. The right side is not flattened, the effect is due to the lighting.) If you don't notice it, forget I said anything.


img

Re: Poplar Bottle

#2

Steve Kubien

"How to" question

Steve Kubien

>Hi Bruce,

How do you select the wood for these? Specifically, does the wood contain the pith when you begin or is the blank cut similar to a typical bowl/platter blank (obviously with different dimensions)?

I agree, this one needed no colouring. It is really nice the way it is. You've got this shape/form nailed down.

Thanks,

Steve Kubien

Re: Poplar Bottle

#3

Re: "How to" question

Bruce Forrest

>The size of trees available around here dictates an end grain orientation. The pith is in the centre, but that doesn't seem to present too much of a problem with this poplar. I sometimes treat the underside with CA (after dyeing, if is is to be dyed) just to be on the safe side.

Re: Poplar Bottle

#4

Steve Kubien

Re: "How to" question

Steve Kubien

>That's sorta what I thought. Thanks.

Steve Kubien

Re: Poplar Bottle

#5

Re: Poplar Bottle

Rick Davenport

>Nicely executed.

I see no need to dye this attractive hunk o' wood.

Rick