Wenge, Macassar Ebony, Padauk
ebd
>Wenge with Macassar Ebony Segments/Padauk Separations - 6.5" wide by 4.75" high - Oil
Knowledge You Can Build On — Est. 1998
Wenge, Macassar Ebony, Padauk
ebd
>Wenge with Macassar Ebony Segments/Padauk Separations - 6.5" wide by 4.75" high - Oil
Re: Wenge, Macassar Ebony, Padauk
ebd
>Whoops - Senior Moment - I guess that's what the preview is for.
Wenge with Macassar Ebony Segments/Padauk Separations - 6.5" wide by 4.75" high - Oil
"Harpoon Wood"
Brad Vietje
>My hat's off to you (nameless though you are to me...) !
Nice looking piece, but I gotta say, anyone who turns that much Wenge deserves our praise -- and a box of band-aids ! Though I find it to be a fascinating wood to look at, it very quickly became my least favorite wood to turn -- or rather, to handle, as my first experience led me to swear and bleed with all the little barbed splinters...
I call it Harpoon Wood !
Nice looking piece -- thanks for the posting.
Safe spinning,
Brad Vietje
Newbury, VT
Nice!
Dave Belser
>How thick are the walls?
- Dave
Brad you're not kidding!
Dave Belser
>Just go near a piece of wenge and you will get a splinter.
Just this weekend I was prepping wenge for a staved construction on my table saw when it launched a TINY little splinter into my knuckle - Ouch! It felt like I'd gotten an electric shock. What amazed me was the size of the splinter, I needed a magnifying glass and tweezers to remove it. Any other wood and it would have just bounced off my finger.
- Dave
Re: "Harpoon Wood"
ebd
>I usually get nailed that way when I'm handling the 8/4 stock. Once it's cut into the shape of a blank I don't usually get stuck. The thing I hate most about turning Wenge is that since it's so brittle you get tons of flying gritty tiny chips. If you don't remember to keep your mouth closed ... Well I'm sure you know.
Re: Nice!
ebd
>About 1/4 overall, slightly less at the rim, about 5/16-3/8 near the bottom.