Inlace vs. epoxy
Danny Wells
>How does Inlace differ from using Epoxy, especially 5-minute epoxy?
Knowledge You Can Build On — Est. 1998
Inlace vs. epoxy
Danny Wells
>How does Inlace differ from using Epoxy, especially 5-minute epoxy?
Re: Inlace vs. epoxy
Norm Smith in Nova Scotia
>I think that Inlace is fiberglass resin.
Re: Inlace vs. epoxy *LINK*
john lucas
>Inlace is a polyester resin. I cuts a little different that 5 minute epoxy. It also comes in colors. One advantage is that you can mix it and let it start to harden. When it gets to the mayonaise or peanut butter stage you can apply it to a verical surface. You may have to keep shifting it until it gets a little more firm. This happens much slower than 5 minute epoxy so you have more control.
I don't think that Inlace forms as strong a bond as 5 minute epoxy but I think it's a little more flexible. See the link below for all the stuff you can mix with Inlace.
http://www.turrtlefeathers.com
oops-can't type *LINK*
john lucas
>
http://www.turtlefeathers.com/
Re: oops-can't type
Danny Wells
>Thanks John, that was helpful.
Probably going to use inlace for what I had in mind.
Re: Inlace vs. epoxy
Dave Shombert
>One other BIG difference - Inlace stinks to high heaven. A very strong chemical odor that quickly permeates the room. I don't use it unless it's warm enough to have the door and windows open (my shop's in the house). It's very pretty, though.
Dave Shombert
Elkins, WV
Re: Inlace vs. epoxy
Wolf Kiessling
>FWIW, since I haven't seen anyone else mention this, I use inlace all the time but never the bonding agent that comes with the "kit". I just buy the color granules and/or nuggets that I want and mix them with 5 minute epoxy. The reason I do this is that it's a whole lot cheaper to do it this way. Can't take credit for the idea, it was first presented to me by one of the guys that works for Woodcraft.....