Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Frozen Anchorseal

Posts

Frozen Anchorseal

#1

Frozen Anchorseal

Joe Pack

>It's not Anchorseal, exactly, but the Woodcraft version. Anyhow, I forgot and left it in an outside storage shed over the winter. Now it is a thick, flexible, but not flowing, mass in the gallon jug. It is not hard, but will not pour either.

Any tips for making this stuff useable again? I just picked up a haul of maple and cherry, and I don't want it to check before I get around to cutting it up.

Re: Frozen Anchorseal

#2

Re: Frozen Anchorseal

Allen Neighbors

>Don't know about the Woodcraft stuff, but my Anchorseal froze last year, and got pretty nasty. I put in a paint stirrer with my screw gun, and re-mixed it. It's still working. HTH.

Re: Frozen Anchorseal

#3

Re: Frozen Anchorseal

Bill Neddow

>Same technique worked for me. Stir the devil out of it and it will be OK.

Re: Frozen Anchorseal

#4

Thanks. Time to stir my arm off, I guess.

Joe Pack

>

Re: Frozen Anchorseal

#5

Re: Frozen Anchorseal

Roger Bell

>Happened to me too. I cut the top off the jug to get the stuff out....added a tad bit of water and stirred it with a drywall mud stirrer that fits in the drill. It came out a little curd-y and not as smooth as before, but it works fine. There are a some tiny lumps on the sealed wood, but no problem