Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Log Hold Down for Chain Sawing Blank *LINK*

Posts

Log Hold Down for Chain Sawing Blank *LINK*

#1

Log Hold Down for Chain Sawing Blank *LINK*

Jerry Hall

>Though this might be of interest to safely hold down a log for chainsawing into an octagon blank. I wanted it to be held down firmly, didn't like the strap (slow and in the way,) didn't like the fancy saw buck designs. So here is what works well for me.

I use the Veritas Hold-Down in 3/4" holes in my saw horses which is fast, keeps work clear, and holds well. At $60 a bit pricey, but worth it. Beside I already had it and never used it for flat work since I got that *&^#!! Mustard Monster.

My small shop doesn't need another large fixture, so I get by just fine with my two saw horses, some sacrificial 2X4's, and some connectors to hold the two saw horses together for ripping the log beween them. The 3/4" ply connectors just slip into the 3/4" holes with pegs to make a parallelogram (adjusts slot size for large and small logs)

Works for me!


img

Veritas Hold Down

Re: Log Hold Down for Chain Sawing Blank *LINK*

#2

Re: Log Hold Down for Chain Sawing Blank

Mark Mandell - Gone Round In Jersey

>Jerry,

Looks like it works for you. Just be mindful that your saw will be throwing oil on your shop floor that will get slippery over time. Suggest a drop cloth the catch the "spray."

Another suggestion: Cut your piece "round" with the blank to the left of your blade rather than as seen in the picture. That way the saw dawg teeth will be engaged in the blank rather than the waste piece so your saw will be more stable and will cut better.

Re: Log Hold Down for Chain Sawing Blank *LINK*

#3

Steve Kubien

Re: Log Hold Down for Chain Sawing Blank

Steve Kubien

>I haven't touched my flat work tools since I got my little lathe but my holdfasts get used at least weekly...for doing just this. Love 'em

Steve Kubien

Re: Log Hold Down for Chain Sawing Blank *LINK*

#4

Re: Log Hold Down for Chain Sawing Blank

Roger Bell

>Nothing wrong with this.............but some cheap or home-made log-dogs work well too.

Re: Log Hold Down for Chain Sawing Blank *LINK*

#5

Re: Log Hold Down for Chain Sawing Blank *LINK*

Jerry Hall

>The picure shows what I know as a "Log Dog." I probably am missing something but I don't see how it would hold a blank tight against a saw horse to safely cut an 8 sided blank. The link shows a less expensive bench hold down ($30) but it requires pounding into place. I like the screw down design of the Veritas. It is easy, fast, to move the blank around and secure it firmly to the saw horse. I have seen a ratchet belt used successfully, but it is not as fast or flexible, but it might hold better. Any other ideas or thoughts out there?


img

Traditional Hold Down

Re: Log Hold Down for Chain Sawing Blank *LINK*

#6

Re: Log Hold Down for Chain Sawing Blank

Ed Larson

>Jerry

Look forward to seeing this hold down at the Wednesday meeting and demo.

Ed