Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Moderator Position

Posts

Moderator Position

#1

Keith Tompkins

Moderator Position

keith tompkins

>Due to time considerations, as well as personal reasons, I have decided to resign as moderator of the turning forum, and I have let Ellis know of this. Anyone interested in the position can contact Ellis directly to discuss the matter. I appreciate the opportunity I was given to contribute to the site, but it's time for someone else to hadle the reins. Thanks for your support, Keith

Re: Moderator Position

#2

Re: Moderator Position

David Walser

>Keith,

Would it be talking out of school for you to give us some idea of the time commitment involved in being the moderator? It might help those inclined to serve make a decision and might prevent Ellis from fielding inquiries from unqualified candidates.

Re: Moderator Position

#3

Keith Tompkins

Re: Moderator Position

keith tompkins

>HI David, The moderator position requires having enough time to check in on the forum on a regular basis, preferrably several times a day. The events of the last couple of days have made me acutely aware that I haven't had the time to stay on top of things....because of that the site suffers.

The Moderator also sets the tone of the site...that is part of the job as well. In addition to keeping things civil,and deleting posts when necessary, they have to be an enthusiastic "cheerleader", steering the site in a positive direction. This is not an easy task, so the prospective moderator should have a thick skin, and have the ability to be diplomatic at all times. I didn't always succeed in either category. I will be available whenever my opinion is needed; Russ extended that same courtesy to me.

Re: Moderator Position

#4

WC's Loss

Mike Cunningham (Cape May)

>For various reasons I don't post here very often, but I for one will miss your wonderful input regarding woodturned art and design. You got me thinking outside the box, expanded my turning horizons and sparked my creative juices. I may not have the same interest in producing the type of work that you do, but I've been able to take your ideas and thoughts and apply them in my own work. You've inspired and helped me. I try to learn from everyone that I'm exposed to and I've done just that with you.

I may not read you here any longer but I'll certainly attend your presentations at various symposia such as Totally Turning.

Thanks!

Mike

Re: Moderator Position

#5

Re: Moderator Position

Jennifer@Indy.USA

>Keith,

I sure do hope that you continue to post here as time permits. Like other's have said, we'll really miss your input and out of the box thinking if you don't :(

See you around,

Jen :)

Re: Moderator Position

#6

Re: Moderator Position

Duane C.Leach

>Sorry to see you go.You will be greatly missed.

I hope you continue to grace us with your words of wisdom time to time.

Duane

Re: Moderator Position

#7

Barb Siddiqui

Re: Moderator Position

Barb Siddiqui

>Thanks for all your thoughtful comments, Kieth. I've learned a lot reading your messages, and hope you will continue to participate here. -BarbS

Re: Moderator Position

#8

Re: Moderator Position

john lucas

>Keith Thanks a lot for the job you did. Like everyone else said I hope we hear from you often.

Re: Moderator Position

#9

Ellis Walentine

We all hate to see you go...

Ellis Walentine

>As I told you on the phone, Keith, I'm sorry your busy schedule doesn't allow enough time for you to be our moderator. You've brought a lot of valuable insights to this forum and I hope you will continue to participate on a daily basis. Your input is highly respected and welcome anytime. Thanks for a great year of service to WoodCentral, and good luck in your new venture.

Ellis

Re: Moderator Position

#10

Thank you for ...

Ed Moore

>your contributions here to babysit us and for your frank and honest critiques. Your opinions are valued. I still remember with pleasure the kind remarks you made about the sea urchin ornament icicles.

Ellis made a comment about your new ventures. Would you care to enlighten the uninformed as to the nature of the venture?

And I wish you the best,

Ed

Re: Moderator Position

#11

Hey Keith!

Ron in Drums PA

>This doesn't stop you from doing that design chat we spoke about.

You are not getting away that easy!

Re: Moderator Position

#12

Thanks

Mark Mandell - Gone Round In Jersey

>It's a nice trick to be able to effectively "moderate" this kind of a group without walking around with a big red "M" painted on your forehead.

Very good job indeed.

MM

Re: Moderator Position

#13

Best Wishes !

Don Orr

>And thanks for all your thoughtful and generous input. I know the job was not always fun or easy but you made it seem so. I imagine you will still check in from time to time and I look forward to those opportunities. You have taught me much and helped me look at my work with more thought. I, as many here, appreciate all your time and efforts on this forum. Please continue sharing your insights when you can-they are priceless.

The last few years have been quite a ride for you and your family and I hope very much it all continues in a positve and fun way.

Good luck and take care,

Don

Re: Moderator Position

#14

Steve Kubien

Thanks Keith

Steve Kubien

>It recently came to my attention that I DID NOT KNOW who the moderator of the turning forum is/was. That plus the fact that so many of us come back here everyday (posting or not) is testament to the fine job you have done. I like someone who doesn't steer things like a freight train but rather guides us along. Great job.

Steve Kubien

Re: Moderator Position

#15

Keith Tompkins

Re: Moderator Position

keith tompkins

>Thanks everyone, I appreciate the thoughtful words. I still expect to participate on the turning site; like everyone else, I've learned a great deal here, and made some very good friends in the process.

It saddens me to step down as moderator, but it was inevitable. My turning career is in full swing; and demands a large portion of my time. I've developed a new concept in measuring tools, and have begun to produce and market the first version. If all goes according to plan, it will be introduced at the Portland symposium. I've been talking with Ellis about advertising space here at WC as well. I have also been approached concerning the production of a series of design DVDs, and am trying to fit that into the schedule as well.

We all come from different perspectives, and have knowledge and experiences to share. I have tried to share mine....I hope I have encouraged a few contributors here at the turning site to "think outside the box", and expand their boundaries a bit.

Re: Moderator Position

#16

Re:And to think that I knew .......

Jamie Donaldson

>... Keith before he was rich and famous!!!! Follow your star while you can Keith, because tomorrow you will be tired and old !!!!!

Re: Moderator Position

#17

Re:And to think that I knew .......

jeff myroup

>Don't say that, I turn 40 on monday!

Jeff

Re: Moderator Position

#18

Keith Tompkins

Re:And to think that I knew .......

keith tompkins

>er...Jamie. I am tired. I am already too old. ugggh.

Re: Moderator Position

#19

I can't remember 40?

john lucas

>

Re: Moderator Position

#20

Re:And to think that I knew .......

Bob Fawcett

>I am going to my 40th high school reunion later next week.

Re: Moderator Position

#21

Re:And to think that I knew .......

Allen Neighbors

>Bob, next month I go to my 49th. :o(

Re: Moderator Position

#22

Re: I can't remember 70?

Don Henthorn

>