Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Jet Band Saw Blade

Posts

Jet Band Saw Blade

#1

Jet Band Saw Blade

C.W.Stivison

>I have a new Jet 14" band saw with a 6" riser. The blade length called for in the Jet catalog is 105". This seems to be too tight and causes the saw to bog down. Even with the tension backed of as far as I can it still seems tight. Any suggestions on what I am doing wrog would be helpful.

Thanks

CW

Re: Jet Band Saw Blade

#2

Re: Jet Band Saw Blade

Russ Babbitt

>Have you tried a different blade?

Re: Jet Band Saw Blade

#3

Re: Jet Band Saw Blade

Brian Hahn in SW Wisconsin

>My band saw also uses a 105" blade. Some blades are definitely shorter than others. I don't remember which manufacturer had the short ones. My advise is to get a new blade from a different manufacturer (brand). Some stores (like Woodcraft) carry several different brands.

Re: Jet Band Saw Blade

#4

Re: Jet Band Saw Blade

Dennis Yoder

>Make sure that the upper wheel is releasing all the way and not hanging up or binding. I had to remove a corner to allow full travel. Dennis Y

Re: Jet Band Saw Blade

#5

That requires a larger blade

MikeF

>I posted a note on this topic last weekish.

This is not documented very well, but that saw uses a 105.5" blade (at least my DLX version does). This is documented in the manual that comes with the riser block.