Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Spalted Maple Bowl

Posts

Spalted Maple Bowl

#1

Spalted Maple Bowl

Bill MacLachlan

>A bowl I recently finished. Could call it a salad bowl except for the spalting. Size is 9.5" OD x 4" high. Finished with 3 coats of Walnut oil. I think the bottom could be smaller yet, but then it might be less stable looking. This is first of 8 bowls I turned from a stash of maple I got last summer. All have been alcohol soaked and were very dry.

I think my pictures are getting better. Taken outside and nothing beats outside lighting. Comments / critiques would be appreciated.

Thanks, Bill


img

Re: Spalted Maple Bowl

#2

Re: Spalted Maple Bowl

Bruce Forrest

>Looks good to me.

Re: Spalted Maple Bowl

#3

Re: Spalted Maple Bowl

Allen Neighbors

>Bill, I'd call it a salad bowl, and wouldn't worry about the spalting. :o) Overall, I like it.

I like the sharper rim treatment, and I also like a base that gives a utility bowl some good support.

I think that if you could have made the profile's very slight ogee shape just a little more pronounced, it would enhance the overall form. Others may not agree.

Anyway... regardless of my pitiful critique, it's still a nice bowl.

Keep turning.... :o)

Re: Spalted Maple Bowl

#4

Re: Spalted Maple Bowl

Bill MacLachlan

>Thanks for the comments Bruce and Allen.

Allen, the ogee comment is interesting as I would not personally think of using it with turning. I usually consider using it in the old days when I actually did flat work.

But it is intersting I have had it used against some of my turnings before, not enough or too much, and yet I do not really see, what I think is an "ogee" on my turnings.

Bill

Re: Spalted Maple Bowl

#5

Re: Spalted Maple Bowl

Allen Neighbors

>It must be these old eyes, then. :o) I think it may be that I "expected" one when I looked at the right edge of the piece in the photo... After you posted the comment about not using the ogee, I went back and looked at the photo again... left side of the piece... not an ogee in sight. I think it may just be the reflected light at the right side that caused me to "see" an ogee. Now I really see none. Sorry for the mixup.

Nice bowl. :o)