Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Andy DiPietro - Derry hollowing system

Posts

Andy DiPietro - Derry hollowing system

#1

Andy DiPietro - Derry hollowing system

Dawn Adams

>Andy -

You posted awhile back about getting a larger version of the hollowing system from Don Derry. I contacted him after you posted and requested the larger bar as well. Have you used yours yet? I got mine a while back, but have not had the time to use it. I love the regular setup, just wondering how much further the larger bar will let me hollow?

Thanks -

Dawn Adams

Re: Andy DiPietro - Derry hollowing system

#2

Andy DiPietro

Re: Andy DiPietro - Derry hollowing system

Andy DiPietro

>Hi Dawn,

I just received the longer bar and spacer last week and I have not had a chance to try them out yet. But, I have been using the standard bar, the bent bar and the scraper and I am very pleased with his system overall. The new longer bar and spacer are 5/8" square and should allow me to hollow up to 14" deep. I gave two hands-on classes this past weekend using Don's hollowing tools and hear are a couple tips we came up with. I work off the tail stock end of a Powermatic 3520B turning normal rotation.

1. Leave about 1.5� space between your HF and tool post plates. Grasp the two tool post plates with your left hand and slide the �� tool bar between your index and middle fingers, like holding a pool cue. This will control the side to side motion and prevent the tool bar from rubbing the inside of the collar.

2. Choke up on the �� bar with your right hand and tuck the laser bar under your right arm. Use a light grip and swing small arcs and you can cut in both directions.

3. When cutting the bottom area of a hollow form the tool bit may tend to pull towards the head stock. This is a cork screw effect, so slow down the lathe speed to about � or 2/3 the speed you were hollowing at.

4. The pencil laser can be the week link at times if it vibrates too much. It is a good idea to buy a spare. I leave the laser off the unit until the wall thickness is reduced to �� or less. Then I mount the laser and tighten the gap on the tool plates and continue having fun.

5. If you want to work using the normal rotation ask Don Derry to supply the opposite hand laser bracket when you order the hollowing system.

I am giving another class on Saturday, so I may have time on Sunday to try out the longer bar. I will post again after I use the longer bar.

Andy DiPietro

Re: Andy DiPietro - Derry hollowing system

#3

Re: Andy DiPietro - Derry hollowing system

Dawn Adams

>Andy -

These are some great ideas that I will try. I have also been using the standard hollowing bar and love working in the reverse rotation. Where are you giving a class this weekend. I may try to come up and watch your technique with these tools.

Re: Andy DiPietro - Derry hollowing system

#4

Andy DiPietro

Re: Andy DiPietro - Derry hollowing system

Andy DiPietro

>Hi Dawn

Did you take the same Don Derry class at Dave Hardy's house? If so, I remember talking with you about the Don's hollowing tool. This Saturday I am teaching a club sponsored HOW (Hands on Workshop) class at my workshop for just one of my Del-Val club members. This is more for beginners making a small hollow form. Lets talk off-line, it may be more interesting to make a large hollow form together say 12 to 14" deep. For that size I ordered a larger chuck, which will come in next week. I ordered a Oneway stronghold chuck with #3 tower jaws. I will email you tomorrow.

Andy DiPietro