Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

I blew it - need a piece of scrap Cherry

Posts

I blew it - need a piece of scrap Cherry

#1

I blew it - need a piece of scrap Cherry

Joe in a Cleveland suburb

>Hi all.

I've been working on a little table for somebody (joeott.blogspot.com). You folks (here on the turning board) gave me some tips on doing pommels. Working on the last one today, I screwed up. Long story short, I can't add the wood back no matter how hard I try. :(

When I bought this chunk of Cherry for the legs it was an off cut and just big enough to make 4 legs. I have lots of Cherry but it's all 4/4. So now I am short.

Before I try to order a piece from an online source I thought I would check to see if anybody here has a scrap piece of cherry they would like to sell and ship to me quickly somehow. It needs to be at least 31" long by 1-7/8" square.

Anybody have a piece of scrap similar to that?

Thanks,

Joe

ps - sorry for the cross post. I posted this on the regular msg board too.

Re: I blew it - need a piece of scrap Cherry

#2

Re: I blew it - need a piece of scrap Cherry

Bill Crommett

>Joe : Why do all four legs have to be out of the same kind of wood ?

Re: I blew it - need a piece of scrap Cherry

#3

I have 8/4 cherry, oak, ash, curly maple

Doug Thompson near Cleveland

>