Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Nautilus Box

Posts

Nautilus Box

#1

Nautilus Box

Dave Belser

>This box is 4" high, 1 3/4" dia. The box is figured Ash and the knob is Indian Rosewood. Finished with one coat of semi gloss lacquer followed by 4 coats of danish oil rubbed in.


This little piece of ash almost got thrown in the fire. It was in a thick slab from a large tree that reveled where a branch had scabbed over and become completely internal to the tree. The slab was cut through this feature in a way that made very difficult to use, it was a challenge to cut and orient this small piece in a usable way. The figure was such that I just couldn't bring myself to toss it. The wood dictated the tall skinny box shape. While I was turning it I kept thinking that it would make a perfect little box to keep hand rolled cigarettes in - of course I don't smoke (anything!) at this point.

The nautilus name comes from the figure that is centered at the end of the thin bark line.

The lid has a collar also made from ash, by doing this I was able to keep the waste from the cut line to the kerf of my razor saw, about 1/32".


I'm really happy how the inside top and bottom came out - flat with really crisp corners. The one problem I did have was my own stupidity.... When I reversed the top I thought I could get away with holding it in my scroll chuck with a little packing foam to protect the wood - Duh! I ended up with 4 sets of ugly marks on the outside of the lid. I then had a hell of a time reworking the profile at the top to remove the marks.

I think the profile at the top looks a little more forced and less graceful than it first did.

Comments and critques wellcome

- Dave

Re: Nautilus Box

#2

Steve Kubien

Re: Nautilus Box

Steve Kubien

>Hi Dave,

I love the box itself but I'm not sure about the finial/top. I think it is too big and it overpowers what looks like some amazing wood in the box. The lines on the box appeal to me.

Thanks,

Steve Kubien

Re: Nautilus Box

#3

Re: Nautilus Box

Dave Belser

>You might be right Steve - I got caught with a lack of planing. The reverse curve of the top (cove?) and a tenon to stick the knob on were done before I had thought much about what should go there. I had already reworked the top once and a smaller knob would have required me to redo the cove up to it, making the top even flatter. It seemed every time I touched it with a gouge, I was less happy with the shape of the box! So I just decided to stop.

That said, the box is rather small and knob on the top feels about right in your fingers.

- Dave

Re: Nautilus Box

#4

Re: Nautilus Box

Bob Fawcett

>Dave,

I think I agree with Steve.

I think the box would look good with no knob or finial, just continue the shape across the top.

Re: Nautilus Box

#5

Re: Nautilus Box

Troy German

>Dave,

On this box and your previous one I think you have done a good job at choosing colors for the finial with the box. That said, I agree with the others, the stiking feature about this box is the "Nautilus" marking on the side, anything that distracts from that should go away.

My $.02, and thanks for posting,

Troy