Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Band saw Question

Posts

Band saw Question

#1

Band saw Question

C.W.Stivison

>I am planning on buying a Jet 14" DS band on Saturday. Should I buy the riser block or not. I plan on using it to cut bowl blanks but I only have a Jet Mini so I am limited to the size of blank I need. Any sugestions would be helpful.

Thanks

CW

Re: Band saw Question

#2

Re: Band saw Question

Fog Tanner

>I bough the riser block for mine when I bought it and never used the bade that came with it. It is much easier to go ahead and get the riser block and assemble it one time. I started out with a 16" lathe, now I have a 24" and looking at buying a Rikon mini. I also wound up buying a 16" MiniMax for the really big blanks, but still use the Jet for some of the smaller pieces. So just because you have a mini today, does not mean that you will not have something bigger tomorrow. Then the price of the riser kit will probably be more, plus the time it takes to disassemble, reassemble, and realign. Add in the cost of your time and doing it now is a bargin.

Re: Band saw Question

#3

Re: Band saw Question

Jim Swank

>Go for it! I bought my Jet BS several years before I started turning, and added the riser when I still had only a Delta Maxi. With the riser, you can cut any blank your mini can handle, any way you want to cut it. Without the riser, you can still round a blank, but can't cut one from a log. I assume we're talking bowls here.....

Re: Band saw Question

#4

Steve Kubien

I agree

Steve Kubien

>Get the riser now and install it. You will want it later (I strongly suspect) even if you never get a larger lathe. As Jim said, logs get over 6" diameter really fast.

Steve Kubien

Re: Band saw Question

#5

Leo Van Der Loo

You can go smaller with, not larger without it.

Leo Van Der Loo

>

Re: Band saw Question

#6

JL

Re: Band saw Question

JL

>Riser block by all means. Must be going to the Woodcraft sale :).

Re: Band saw Question

#7

Re: Band saw Question

john lucas

>CW I would go with the riser blocks also. Even with a mini you will find that you'll have a log just a little too big that needs to be thinned. I ran into this a lot when cutting out blanks for natural edge bowls. When I had the 6" depth I always had to get out the ax or chainsaw to knock off a high point or thin it down. Now I just put it under the bandsaw and go. I don't think you'll ever regret getting the riser.