microwave question
ken chase
>Is there a problem placing a freshly rough hollowed form that has been coated with cva glue into the microwave oven to hasten the drying process?
Thanks
Ken
Knowledge You Can Build On — Est. 1998
microwave question
ken chase
>Is there a problem placing a freshly rough hollowed form that has been coated with cva glue into the microwave oven to hasten the drying process?
Thanks
Ken
Re:CA glue or PVA glue??
JL
>Not sure which glue you mean. People do use microwaves to dry bowls. Make sure that there is no metal present and do it on very low power.
In interest of peace and harmony, don't use the kitchen microwave :).
Re:CA glue or PVA glue??
ken chase
>Oops. My mistake CA glue
Re:CA glue or PVA glue??
Dick Hines
>I would not want to in the house while you were cooking the turnings. The fumes from CA can be "BAD" stuff.
Try cooking before you do the CA coating.
Re:CA glue or PVA glue??
JL
>Don't use the kitchen microwave if it is CA then. Do it outside and under low power.
Re: microwave question
robert davis
>i have a garage sale microwave in my shop . idry apiece wrapped in abig towel at defrost setting for ten min. alternate dry towels. when piece has cooled rwpeat until ppiec no longer loses weight