Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Dyed Poplar Hollow Form

Posts

Dyed Poplar Hollow Form

#1

Dyed Poplar Hollow Form

Bruce Forrest

>This is a dyed poplar hollow form which measures about 10 inches tall. Dyed with aniline dyes. Comments welcome.

[Since I'm doing another one in green which I'm going to call "Spock", I suppose I should name this one "Kirk".

Then maybe a yellow one called "Quark". Or maybe that one should be lavender. I understand that Ferengi blood is yellow but turns color on exposure to the air.]


img

Re: Dyed Poplar Hollow Form

#2

Re: Dyed Poplar Hollow Form

Jeff Taylor - Bloomington, Indiana

>now THAT is a shiny finish ... very nice ... in my humble opinion.

Re: Dyed Poplar Hollow Form

#3

Lovely form, and great color!

Gil Jones on Lake Seminole GA

>

Re: Dyed Poplar Hollow Form

#4

Re: Dyed Poplar Hollow Form

Ed Kelle

>Its a beautiful form, like a raindrop ready to burst. great work

Re: Dyed Poplar Hollow Form

#5

Dick Hines

Re: Dyed Poplar Hollow Form

Dick Hines

>Bruce, did you hollow through the bottom?

Love the color. Post the rest when you get them done.

Re: Dyed Poplar Hollow Form

#6

Re: Dyed Poplar Hollow Form

Bruce Forrest

>Yes, it was hollowed through the bottom and then plugged. Then, when I finished the outside of the top, I drilled the last little bit from the top down. When you have an opening this small, it automatically means that the inside is as smooth as silk. :-)

Re: Dyed Poplar Hollow Form

#7

Bob Moffett

Re: Dyed Poplar Hollow Form

Bob Moffett

>Very nice. I like the shape.

Re: Dyed Poplar Hollow Form

#8

Dick Hines

Re: Dyed Poplar Hollow Form

Dick Hines

>Yep, those small openings make for easy sanding.

That's what I like about turning hollow forms. Only one side to sand.

Re: Dyed Poplar Hollow Form

#9

Steven Antonucci

Love it.

steve antonucci

>Has a very Pier1 feel to it.

In the top where you transition to the neck, it appears on the left side that the transition has a flat spot, but not on the right? Just a picture problem, or is it because the recentering to finish was slightly off?

steve

Re: Dyed Poplar Hollow Form

#10

Re: Dyed Poplar Hollow Form

Mike Cunningham (Cape May)

>Bruce,

Very nice! Can you comment on the finish you used over the aniline? Also, how did you apply the dye?

Thanks,

Mike

Re: Dyed Poplar Hollow Form

#11

Re: Dyed Poplar Hollow Form

Bruce Forrest

>The dye was mixed (red and black) and then just liberally applied with a paper towel. Then I usually put it in the microwave (if it fits) for a few very short bursts to speed along the drying. The finish is about 10 coats of MinWax wipe-on gloss polyurethane. The poplar really soaks it up and for this piece it was about eight coats before most of it stopped being sucked inside. Between coats- a bit of a light sanding to keep the dust nibs under control. It's not a very high tech or a very labor intensive process. Ten minutes every few hours to wipe on another coat.(I use a small piece of an old cotton T- shirt.)

Bruce

Re: Dyed Poplar Hollow Form

#12

Re: Dyed Poplar Hollow Form

Mike Cunningham (Cape May)

>Thank you Bruce. So the dye when mixed, doesn't actually mix becoming one color but stays somewhat separate and applies that way.....correct?

Thanks again!

Mike

Re: Dyed Poplar Hollow Form

#13

Re: Dyed Poplar Hollow Form

Bruce Forrest

>No, the dyes are all water based and mix totally in each other. The result is a darker red color of the dye. The differences in color on the piece is because of the wood itself. It's poplar which is spalted a bit and different parts of it absorb to a different degree. If I applied the same dye to ash for example, the piece would be much more unifrom in color.

Bottom line is that the effect you see is very easy to get on this wood. Just slop it on and let nature take its course. No need for airbrushing or much in the way of artistic talent. But there's no need to tell the customers that. Shhhhh....

Bruce

Re: Dyed Poplar Hollow Form

#14

Steve Kubien

I love it

Steve Kubien

>I am usually "so-so" on my view of hollow forms, probably because I haven't attempted one and at this stage in my young turning life, I am less into "art" and more into function. They just don't interest me that much. Having said that, I love this piece! The shape is very appealling, the colour is gorgeous and the final finish is a view steps beyond gorgeous. I want to pick it up and look inside!

Great job.

Steve Kubien

Ajax, Ontario

Re: Dyed Poplar Hollow Form

#15

Re: Dyed Poplar Hollow Form

Mike Cunningham (Cape May)

>Thanks again Bruce!

Re: Dyed Poplar Hollow Form

#16

Re: Dyed Poplar Hollow Form

Bruce Forrest

>Thanks to all who have taken the time to comment thus far.

Steve, As far as looking inside goes, that'd be kind of tough. The bottom is plugged so that you have to look fairly closely to see that it had ever been open, and the top hole is only about 1/4 in diameter. So it's not possible to get a good view of the inside--which means that it is as good looking on the inside as the outside. Or maybe since Schroedinger's cat was both alive and dead at the same time inside a box(as long as you didn't look to check. If you looked, the cat had to choose one state to be in), Maybe it's both finished and unfinished at the same time.

Thanks again for the comments.

Re: Dyed Poplar Hollow Form

#17

Dazia

Jorge Castaneda

>Bruce,

I love this shape is perfect and the dying and finishing is something else again.

Thanks for sharing

Jorge

Hey!, the lavander one should be Dazia...: ) you know, the simbion.