Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Skew chisel Video and Sharpening question

Posts

Skew chisel Video and Sharpening question

#1

Skew chisel Video and Sharpening question

Joe in a Cleveland suburb

>Hi folks.

I've been slowly working on some table legs with a pommel at the top. Some of you folks helped a few weeks ago suggesting the use of a skew chisel. There were also a couple on-line videos that were helpful. That's working well - as long as I'm careful.

I seem to recall several suggestions for a DVD/video on skew chisel use. What was that video? I think it was Lancer? Sound right?

Lastly, I have one of those cheap Lowes grinders. Not a slow speed one. It's what I have to use for now. What wheel should I be using on it?

Thanks.

Joe

Re: Skew chisel Video and Sharpening question

#2

Re: Skew chisel Video and Sharpening question

John Lucas

>I use any grinder to produce the rough shape and a hollow grind. I actually sharpen the edge with diamond hones. I use the DML plastic ones. I usually finish the edge with a leather strop.

Alan Lacer's video is excellent.

Re: Skew chisel Video and Sharpening question

#3

Re: Skew chisel Video and Sharpening question

Gordon Seto

>Joe,

Another very good video DVD on using a skew is by Alan Batty.

You can't get too sharp on a skew. Alan Lacer suggests hollow grind and honing by hand or a power hone.

Gordon

Re: Skew chisel Video and Sharpening question

#4

Re: Skew chisel Video and Sharpening question

Greg Haugen

>The video you're looking for is "The Skew; the dark side and sweet side." It goes over in depth sharpening and all of the cuts. www.alanlacer.com (videos) You can also order it online from Packard, Woodcraft, or Craft Supplies.

As far as sharpening you'll have to use a grinder to "profile" it but then hone it to sharpen it. Diamond hones (fine) are the preferred method. The video also covers that. A grinder just doesn't get a skew sharp enough. As far as a wheel Alan recommend 80 or 100. Look for a good aluminum oxide wheel, usually white, and they run in the 20-30 dollar range. Yes there are better wheels but most do prefer the white wheels and they're cost doesn't break the bank. Any wheel you get if you grind too much it will heat up and you will dress it after sharpening. If you can choose it, choose a J or K hardness. I use the wheels from Woodcraft and also Highland Hardware. Both have websites, their name and .com.

Hope that helps,

Greg

Re: Skew chisel Video and Sharpening question

#5

Re:Joe-an AlO(aluminum......

Jamie Donaldson

>...oxide- white in color)wheel is most suited for turning HSS tools, and for the price of a pair of 60 and 120 grit wheels you can about buy the whole package in the 8" slow speed grinder at Woodcraft stores.

Re: Skew chisel Video and Sharpening question

#6

Use a spindle gouge

John Lucas

>Joe I love the skew and think it is a good tool for what your trying to do but if you already have a spindle gouge just use it. It's a little trickier than the skew to cut a perfectly square edge but if you want a rounded transition from the square to round it's a great tool.

Re: Skew chisel Video and Sharpening question

#7

Re: Use a spindle gouge

Joe in a Cleveland suburb

>John,

I've used the spindle gouge too. I've even used one of my nice Doug Thompson gouges. They all seem to work. The skew is more fun for whatever reason. Maybe cuz I'm playing with fire... :)

Here's a couple shots of what I've done so far. I'm happy so far considering this is the first I've done this. Live and learn they say.

http://joeott.blogspot.com/

First I've ever done one of these blog thingy's too.

Joe