Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Lathe Update: Accessories...

Posts

Lathe Update: Accessories...

#1

Lathe Update: Accessories...

dwr

>... here is an 11" faceplate being made from Cold Rolled Steel... for those larger turnings;)


img

Re: Lathe Update: Accessories...

#2

Almost finished with the turning...

dwr

>... need to thread for 1.25x 1 TPI spindle and counter bore the back for future lathe reference if I need to do any more work to the faceplate...


img

Re: Lathe Update: Accessories...

#3

My personal machinist...

dwr

>Stan... a retired director of engineering and fabrication for a national dental equipment manufacturer... Great guy and I will be using his services more in the future!


img

Re: Lathe Update: Accessories...

#4

Re: Lathe Update: Accessories...

Doug Thompson near Cleveland

>Can you find a log big enough to turn on that lathe let alone mount it on the spindle... hoist/chainfall. I'm glad you found a experienced machinist in your area, this will speed things along.

Figure out what roughing tool you want to use and I'll make it.

Re: Lathe Update: Accessories...

#5

1 TPI??

Ken Grunke from SW WI

>I'm sure that't a typo but hey, maybe a really fast thread like that could work! Kind of hard to machine with a regular metal lathe, though.

Keep up the good work, your project is fun to watch.

Re: Lathe Update: Accessories...

#6

ooops!

dwr

>In my rush to Easter celebrations I got the threads wrong...

Try 1.25 x 8 TPI...

1 TPI would make changing the faceplate easier...;)

Re: Lathe Update: Accessories...

#7

Re: Lathe Update: Accessories...

dwr

>Doug,

Thanks for the offer, I will certainly take you up on it.

I have some "small" Maple logs beside the house, which was part of a trade with my friend, Jerry Nordby. I will take a picture of them when I get back home later today, and post it here. I will obviously start a little smaller as I try to increase my testicular fortitude... as one person so accurately assessed at that prospect of turning them.

Re: Lathe Update: Accessories...

#8

Re: Lathe Update: Accessories...

dwr

>Doug,

I might need to talk to you about a custom coring tool I have in mind, as I will be using blanks that will have some serious diameter and don't want to work that hard... let alone waste the materials.

The commercial coring tools stop at about 20" diameter and that is smaller than where most of my bowls will start.

Re: Lathe Update: Accessories...

#9

My Maple Blanks... Doug....

dwr

>... this is what I will need tools for...

They are only 38" x 38" x 20" matched halves and look like they have some curly figure showing on the edges...

And the lathe is designed for much larger piecse... he says... with sweat forming on his forehead.


img

Re: Lathe Update: Accessories...

#10

Maple with toys for scale

dwr

>Here is a slight profile with our 4 year olds bike and wagon for scale...


img

Re: Lathe Update: Accessories...

#11

Maple...last...

dwr

>...picture...


img